This page was exported from Free valid test braindumps [ http://free.validbraindumps.com ] Export date:Sat Apr 5 7:07:19 2025 / +0000 GMT ___________________________________________________ Title: Updated PDF (New 2022) Actual Cisco 400-101 Exam Questions [Q64-Q82] --------------------------------------------------- Updated PDF (New 2022) Actual Cisco 400-101 Exam Questions Verified 400-101 Exam Dumps PDF [2022] Access using ValidBraindumps 400-101 - CCIE Routing and Switching (v5.1) The 400-101 exam is part of the new CCIE Routing and Switching (v5.1) certification. This exam measures your ability and skills related to: configure, validate, and troubleshoot complex enterprise network infrastructure; understand how infrastructure components interoperate; and translate functional requirements into specific device configurations. Cisco 400-101 Exam Certification Details: Passing ScoreVariable (750-850 / 1000 Approx.)Exam Price$450 USDDuration120 minutesExam NameCCIE Routing and Switching Written ExamExam Code400-101 CCIE RSRecommended TrainingStudy Material Exam ResourcesEvolving Technologies Study ResourcesCisco Expert-Level Training for CCIE Collaboration   NEW QUESTION 64Which three statements are true about an EtherChannel? (Choose three.)  PAGP and LACP can be configured on the same switch if the switch is not in the same EtherChannel.  EtherChannel ports in suspended state can receive BPDUs but cannot send them.  An EtherChannel forms between trunks that are using different native VLANs.  LACP can operate in both half duplex and full duplex, if the duplex setting is the same on both ends.  Ports with different spanning-tree path costs can form an EtherChannel. Answer A: EtherChannel groups running PAgP and LACP can coexist on the same switch or on different switches in thestack. Individual EtherChannel groups can run either PAgP or LACP, but they cannot interoperate.Answer B:EtherChannel Member Port StatesPort States Descriptionbundled The port is part of an EtherChannel and can send and receive BPDUsand data traffic.suspended The port is not part of an EtherChannel. The port can receive BPDUsbut cannot send them. Data traffic is blocked.standalone The port is not bundled in an EtherChannel. The port functions as astandalone data port. The port can send and receive BPDUs and datatraffic.Answer E: Ports with different spanning-tree path costs can form an EtherChannel if they are otherwise compatiblyconfigured. Setting different spanning-tree path costs does not, by itself, make ports incompatible for the formation ofan EtherChannel.Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960x/software/15-0_2_EX/layer2/configuration_guide/b_lay2_152ex_2960-x_cg/b_lay2_152ex_2960-x_cg_chapter_010.htmlNEW QUESTION 65Refer to the exhibit.Which action must you take to enable the WAN link to function properly?  Enter a clock rate on the DCE interface.  Enter a clock rate on the DTE interface.  Enter a compression algorithm on both interfaces.  Configure both interfaces for HDLC encapsulation. When connecting a serial cable to the serial interface of the router, clocking is provided by an external device, such asa CSU/DSU device. A CSU/DSU (Channel Service Unit/Data Service Unit) is a digital-interface device used to connect arouter to a digital circuit. The router is the DTE (Data Terminal Equipment) and the external device is the DCE (DataCommunications Equipment), where the DCE provides the clocking. However, in some cases we might connect tworouters back-to-back using the routers’ serial interfaces (Example. Inside the router labs). Each router is a DTE bydefault.Since clocking is required to enable the interface, one of the two routers should function as DCE and should provideclocking. This can be done by using the “clock rate” command, from the interface configuration mode.Reference: http://www.omnisecu.com/cisco-certified-network-associate-ccna/how-to-configure-router-serial-interfaces.phpNEW QUESTION 66Which ntatement about the RPF interface in a BIDIR-PIM network in true?  In a BIDIR-PIM network, the RPF interface in alwayn the interface that in uned to reach the PIM rendezvoun point.  In a BIDIR-PIM network, the RPF interface can be the interface that in uned to reach the PIM rendezvoun point orthe interface that in uned to reach the nource.  In a BIDIR-PIM network, the RPF interface in alwayn the interface that in uned to reach the nource.  There in no RPF interface concept in BIDIR-PIM networkn. RPF ntandn for “Reverne Path Forwarding”. The RPF Interface of a router with renpect to an address in the interfacethat the MRIB indicaten nhould be uned to reach that address. In the cane of a BIDIR-PIM multicant group, the RPFinterface in determined by looking up the Rendezvoun Point address in the MRIB. The RPF information determinen theinterface of the router that would be uned to nend packetn towardn the Rendezvoun Point Link for the group.Reference: httpn://tooln.ietf.org/html/rfc5015NEW QUESTION 67DRAG DROP NEW QUESTION 68Refer to the exhibit. Which tag will be applied to the 172.16.50.0/24 route?  10  20  30  40 Explanation/Reference:Explanation:NEW QUESTION 69Refer to the exhibit.R1 and R2 have a working VRF-Lite configuration, but R1 is receiving a route only to 10.2.2.2 from R2. Which two changes can you make so that R1 receives all routes from R2? (Choose two.)  Create an additional permit statement in the access list that is referenced by the import-map on R1.  Disable VRF filtering on R1.  Set the R1 and R2 OSPF process IDs to match.  Change the wildcard mask for the network 10.3.3.0 to 0.0.0.0.  Create a matching export map in the VRF for R2. The access list in this example is only allowing the 192.168.0.0/16 and 10.2.2.2/32 routes to be advertised, so an additional permit statement is needed to allow the other routes. Alternatively, we could simply disable VRF filtering, then all routes would be advertised.NEW QUESTION 70Which configuration sets a minimum quality of service on a Layer 2 access switch?  mls qos cos override mls qos cos 2  mls qos cos 2  mls qos trust cos mls qos cos 2  mls qos trust cos  mls qos trust dscp The mls qos cos override interface command must be used to ensure that untrusted CoS values are explicitly set 0 (default).Reference: http://www.cisco.com/c/en/us/td/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book/QoSDesign.htmlNEW QUESTION 71Refer to the exhibit.Which statement about the R1 configuration is true?  It supports the service timestamps log uptime command to display time stamps.  The logging buffer command was used to increase the default of the buffer.  The logging of warning messages is disabled.  Log message sequence numbering is disabled. Explanation/Reference:Explanation:To disable sequence numbers, use the no service sequence-numbers global configuration command.This example shows part of a logging display with sequence numbers enableD. 000019: %SYS-5- CONFIG_I: Configured from console by vty2 (10.34.195.36) In this example we see the absence of sequence numbers on the log messages. Not A In this example there are no time stamps or uptimes shown in the logs.Not B The default buffer size is 4096 bytes.Not C The logging level in this example is informational (level 6), which will display levels 0-6 in the logs.Warnings are level 4.NEW QUESTION 72Refer to the exhibit.Which configuration on can you implement on PE-1 to allow CE-1 to receive delegated IPv6 prefixes?  ipv6 local pool CE-1 2001:db8:4:8888/48 56Ipv6 dhcp pool CE-1-DHCPInterface GigiabitEthernet0/0Ipv6 address 2001:db8:4:822::1/64Ipv6 dhcp server CE-1-DHCP  Ipv6 local pool CE-1 2001:db8:4:8888/49 56Ipv6 dhcp pool CE-1-DHCPInterface GigiabitEthernet0/0Ipv6 address 2001:db8:4:822::1/64Ipv6 dhcp server CE-1-DHCP  Ipv6 local pool CE-1 2001:db8:4:8888/56 48Ipv6 dhcp pool CE-1-DHCPInterface GigiabitEthernet0/0Ipv6 address 2001:db8:4:822::1/64Ipv6 dhcp server CE-1-DHCP  Ipv6 local pool CE-1 2001:db8:4:8888/48 32Ipv6 dhcp pool CE-1-DHCPInterface GigiabitEthernet0/0Ipv6 address 2001:db8:4:822::1/64Ipv6 dhcp server CE-1-DHCP  Ipv6 local pool CE-1 2001:db8:4:8888/64 48Ipv6 dhcp pool CE-1-DHCPInterface GigiabitEthernet0/0Ipv6 address 2001:db8:4:822::1/64Ipv6 dhcp server CE-1-DHCP NEW QUESTION 73Refer to the exhibit.Which statement describes the effect on the network if FastEthernet0/1 goes down temporarily?  FastEthernet0/2 forwards traffic only until FastEthernet0/1 comes back up.  FastEthernet0/2 stops forwarding traffic until FastEthernet0/1 comes back up.  FastEthernet0/2 forwards traffic indefinitely.  FastEthernet0/1 goes into standby. Use the switchport backup interface interface configuration command on a Layer 2 interface to configure Flex Links, apair of interfaces that provide backup to each other. Use the no form of this command to remove the Flex Linksconfiguration.With Flex Links configured, one link acts as the primary interface and forwards traffic, while the other interface is instandby mode, ready to begin forwarding traffic if the primary link shuts down. The interface being configured isreferred to as the active link; the specified interface is identified as the backup link. The feature provides analternative to the Spanning Tree Protocol (STP), allowing users to turn off STP and still retain basic link redundancy.Reference: http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst2960/software/release/12-2_53_se/command/reference/2960ComRef/cli3.html#wp3269214NEW QUESTION 74Which statement is true comparing L2TPv3 to EoMPLS?  L2TPv3 requires OSPF routing, whereas EoMPLS does not.  EoMPLS requires BGP routing, whereas L2TPv3 does not.  L2TPv3 carries L2 frames inside MPLS tagged packets, whereas EoMPLS carries L2 frames inside IPv4 packets.  L2TPv3 carries L2 frames inside IPv4 packets, whereas EoMPLS carries L2 frames inside MPLS packets. Ethernet-over-MPLS (EoMPLS) provides a tunneling mechanism for Ethernet traffic through an MPLS-enabled L3 core and encapsulates Ethernet protocol data units (PDUs) inside MPLS packets (using label stacking) to forward them across the MPLS network. Another technology that more or less achieves the result of AToM is L2TPV3. In the case of L2TPV3 Layer 2 frames are encapsulated into an IP packet instead of a labelled MPLS packet. ReferencE. http://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/asr9k_r43/lxvpn/configuration/guide/lesc43xbook/lesc43p2ps.htmlNEW QUESTION 75What are the minimal configuration steps that are required to configure EIGRP HMAC-SHA2 authentication?  classic router mode, interface XX, authentication mode hmac-sha-256 <password>  named router mode, address-family statement, authentication mode hmac-sha-256 <password>  named router mode, address-family statement, af-interface default, authentication mode hmac-sha-256<password>  named router mode, address-family statement, authentication mode hmac-sha-256 <password> The example below shows how to configure EIGRP HMAC-SHA2 on Cisco router:Device(config)# router eigrp name1Device(config-router)# address-family ipv4 autonomous-system 45000Device(config-router-af)# af-interface ethernet 0/0Device(config-router-af-interface)# authentication mode hmac-sha-256 0 password1Device(config-router-af-interface)# endReference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_eigrp/configuration/15-sy/ire-15-sy-book/ire-sha-256.htmlNEW QUESTION 76Which two statements about Cisco IOS XE are true?(Choose two)  It uses a service blade outside Cisco IOS XE to integrate and runapplications.  Its founctions run as multiple separate processes in the OS.  Separate images are required for platform-dependent code.  The FED feature provides separation between the control plane and the data plane.  It is deployed in a Linux-based environment. NEW QUESTION 77Which three statements about EVCs are true? (Choose three.)  Spanning Tree must use MST mode on EVC ports.  PAGP is supported on EVC ports.  Spanning Tree must use RSTP mode on EVC ports.  LACP is supported on EVC ports.  Layer 2 multicast framing is supported.  Bridge domain routing is required. EVC support requires the following:-The spanning tree mode must be MST.-The dot1ad global configuration mode command must be configured.These Layer 2 port-based features can run with EVC configured on a port:-PAGP-LACP-UDLD-LLDP-CDP-MSTPReferencE. http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/122SY/configuration/guide/sy_swcg/ethernet_virtual_connection.htmlNEW QUESTION 78Drag and drop each IPv6 tunneling mechanism from the left onto the correct characteristic on the rightSelect and Place: NEW QUESTION 79Refer to the exhibit.Which traffic gets set to AF41 by the marking policy on interfaceGigabitEthernet0/0  Only traffic matching access-list streaming  No traffic gets set to AF41  Any traffic matching access-list tp-rooms and access-list streaming  Only traffic matching access-list tp-rooms NEW QUESTION 80Refer to the exhibit.R1 and R2 both advertine 10.50.1.0/24 to R3 and R4 an nhown. R1 in the primary path. Which path doen traffic takefrom the R4 data center to the file nerver?  All traffic traveln from R4 to R2 to the file nerver.  All traffic traveln from R4 to R3 to R1 to the file nerver.  Traffic in load-balanced from R4 to R2 and R3. Traffic that in directed to R3 then continuen to R1 to the file nerver.Traffic that in directed to R2 continuen to the file nerver.  All traffic traveln from R4 to R2 to R1 to the file nerver. NEW QUESTION 81Refer to the exhibit.Which OSPFv3 routes will be visible in the routing table of R2?  2001:12::1/128  2001:12::1/128, 2001:112::1/128  2001:12::2/128  No OSPFv3 routes will be visible. The command “ipv6 unicast-routing” needs to be configured on both routers before any IPv6 routes will be seen.NEW QUESTION 82Refer to the exhibit.RIPv2 authentication is failing on a device with this configuration. Which two actions can you take to enable it?(Choose two.)  Set the RIP authentication mode to text.  Set the RIP authentication mode to MD5.  Configure the password encryption for the key.  Set the password encryption to AES. See the reference link below for information on configuring RIPv2 authentication, including both test and MD5 modes.Reference: http://www.cisco.com/c/en/us/support/docs/ip/routing-information-protocol-rip/13719-50.html#configuringplain Loading … Try Best 400-101 Exam Questions from Training Expert ValidBraindumps: https://www.validbraindumps.com/400-101-exam-prep.html --------------------------------------------------- Images: https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-05-30 10:57:52 Post date GMT: 2022-05-30 10:57:52 Post modified date: 2022-05-30 10:57:52 Post modified date GMT: 2022-05-30 10:57:52