2022 Latest JN0-663 dumps Exam Material with 95 Questions [Q43-Q61] : Free valid test braindumps : http://free.validbraindumps.com

NO.43 Exhibit:

Referring to the exhibit, which path would traffic passing through R1 take to get.

R1 -> R2 -> R4 -> R6

R1 -> R2 -> R3 -> R6

R1 -> R3 -> R5 -> R6

R1 -> R3 -> R4 -> R6

NO.44 Exhibit:

You notice an inconsistency between the routing table and the OSPF database, as shown in the exhibit.
What are two reasons for this behavior? (Choose two.)

The LSA is a Type 4 LSA.

An OSPF export policy is being applied to the route.

An OSPF import policy is being applied to the route.

The LSA is a Type 5 LSA.

NO.45 Exhibit:

The exhibit shows a BGP peering session for two PE routers. The BGP session is up, but the hosts in the Layer
2 VPN that uses the BGP session are unable to communicate.
What is the problem in this situation?

The BGP peer does not support the restarter functionality.

The local BGP router does not support Layer 2 VPN and Layer 3 VPN NLRI address families at the same time.

There is a mismatch in the supported NLRI address families between the BGP peers.

The BGP peer does not support the add-path feature.

NO.46 Exhibit.

Referring to the exhibit, which command would reduce the size of the OSPF database and corresponding routes?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

NO.47 Exhibit:

Referring to the exhibit, which three statements are correct? (Choose three.)

This route contains the MAC address of an end host.

The router with the IP address 10.101.100.3 is the originator of this route.

This route is an EVPN Type-1 route.

This ESI Auto-Discovery route is used for designated forwarder election.

The ESI is 00:22:22:22:22:22:22:22:22:22.

NO.48 Exhibit:

A network administrator is concerned about the number of LSAs that they are observing on the network.
What will reduce Type 7 LSAs advertised from R2 to the non-backbone routers shown in the exhibit?

Configure no-summaries under protocols ospf3 on R2.

Configure no-naaa-abr under protocols ospf3 on R2.

Configure no-summaries under area 0.0.0.2 on R2.

Configure nssa under area 0.0.0.2 on R2.

NO.49 Exhibit:

Referring to the exhibit, which statement is true?

The route is learned from only one neighbor.

This is a multipath route.

The route is learned from three different neighbors.

This is a multihop route.

NO.50 Exhibit:

Referring to the exhibit, which statement is true?

The route is learned from only one neighbor.

This is a multipath route.

The route is learned from three different neighbors.

This is a multihop route.

NO.51 Exhibit:

You are troubleshooting an issue where R1 is no longer receiving the default IS-IS route from R3.
Referring to the exhibit, which action would you take to solve the problem?

Delete the protocols isis ignore-attached-bit configuration statement on R3.

Delete the protocols isis import configuration statement on R1.

Delete the protocols isis level 2 disable configuration statement on R3.

Delete the protocols isis ignore-attached-bit configuration statement on R1.

NO.52 Exhibit:

Referring to the exhibit, which two statements are true? (Choose two.)

An AS loop will not exist between CE-1 and CE-2 and the BGP routes will be shared.

The CE-1 and CE-2 routes will have the same route distinguisher, which will stop the BGP routes from being shared.

An AS loop will exist between CE-1 and CE-2 and the BGP routes will not be shared.

The CE-1 and CE-2 routes will have the same route distinguisher, which will not stop the BGP routes from being shared.

NO.53 Which two statements are true about what a route reflector does by default when distributing routes it has received from reflector clients? (Choose two.)

It changes the default BGP attributes to inform peers that it is a route reflector.

It adds its cluster ID to the client-received routes.

It sets the next hop of all routes to “self’ to prevent routing loops.

It does not change any received BGP attributes.

NO.54 Exhibit:

Referring to the exhibit, external routes are being received at R1. These routes must appear on R5.
Which action will produce this result?

Turn on wide metrics on R1 and R2 and write an export policy on R4 from level 2 to level 1 matching the external routes.

Turn on wide metrics on R4 and R5 and write an export policy on R2 from level 1 to level 2 matching the external routes.

Write an export policy on R4 from level 2 to level 1 matching the external routes.

Write an export policy on R2 from level 1 to level 2 matching the external routes.

NO.55

A customer wants to reduce LSP flooding in their IS-IS network.
Which parameter should you change to accomplish this task?
[edit protocols isis]

user@router# set spf-options rapid-runs 5
[edit protocols isis interface <interface-name>]

user@router# set csnp-interval 65535
[edit protocols isis interface <interface-name>]

user@router# set lsp-interval 1000
[edit protocols isis interface <interface-name>]

user@router# set mesh-group <mesh-group-number>

NO.56 Exhibit.

Two CE devices (CE-1 and CE-2) belong to the same customer and connect into a single PE device (PE-1) However, the CE devices cannot communicate with each other You want to allow the CE devices to communicate with each other Referring to the exhibit, which action would solve the problem?

Configure both routing instances with the set routing-opt ions auto-export-statement

Configure both routing instances with the set routing-options autonomous-system loops 3 statement

Configure both routing instances with the vrf-table-label statement

Configure both routing instances with the as-override statement within the BGP protocol

NO.57

Referring to the exhibit, traffic sent from CE-A2 to PE3 does not loop back to CE-A2 through PE2.
Winch two EVPN functions accomplish this task? (Choose two.)

multicast ingress replication

aliasing

split horizon

designated forwarder election

NO.58 Exhibit:

The exhibit shows a BGP peering session for two PE routers. The BGP session is up, but the hosts in the Layer
2 VPN that uses the BGP session are unable to communicate.
What is the problem in this situation?

The BGP peer does not support the restarter functionality.

The local BGP router does not support Layer 2 VPN and Layer 3 VPN NLRI address families at the same time.

There is a mismatch in the supported NLRI address families between the BGP peers.

The BGP peer does not support the add-path feature.

NO.59 You are asked to configure a series of interface policers and firewall filters, which include policers, on the same device You must ensure that the two configuration methods do not conflict.
What are two considerations when performing this task? (Choose two.)

On inbound traffic, interface policers are applied before firewall filters.

On inbound traffic, firewall filters are applied before interface policers.

On outbound traffic, interface policers are applied before firewall filters.

On outbound traffic, firewall filters are applied before interface policers.

NO.60

Referring to the exhibit, what will the IS-IS cost be for R3 to reach R1?

301

310

NO.61

A network administrator is migrating from IPv4 to IPv6 and one of the IS-IS adjacencies is not coming up between R1 and R2.
Which action will solve the problem?

Remove topologies ipv6-unicastfrom protocols isison R2.

Configure topologies ipv4-unicastfrom protocols isison R2.

Remove topologies ipv6-unicastfrom protocols isison R1.

Configure an IPv4 address on interface ge-0/0/1on R1.

2022 Latest JN0-663 dumps Exam Material with 95 Questions [Q43-Q61]

Career Benefits

Test Prerequisites