This page was exported from Free valid test braindumps [ http://free.validbraindumps.com ] Export date:Sat Apr 5 21:27:14 2025 / +0000 GMT ___________________________________________________ Title: HPE6-A66 Exam Questions Get Updated [2022] with Correct Answers [Q17-Q41] --------------------------------------------------- HPE6-A66 Exam Questions Get Updated [2022] with Correct Answers Practice HPE6-A66 Questions With Certification guide Q&A from Training Expert ValidBraindumps Understanding functional and technical aspects of Gather and analyze data, and document customer requirements The following will be asked from you in the HP HPE6-A66 exam dumps pdf: Given an outline of a customer's needsfor a simple campus environment determine the information required to create a solution   NEW QUESTION 17When a WLAN has to support nomadic devices, a network architect must primarily plan for which component in their design?  type of users  number of users per location  mobility requirements and usage  density of users NEW QUESTION 18A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?  Place the APs above the ceiling and behind the walls  Place a strip of tape over the LEDs  Order Aruba AP covers for the APs  Paint the APs to match the ceilings or walls NEW QUESTION 19A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?  8400  3810M  2930F  6300 NEW QUESTION 20A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.Which wireless solution would best meet this company’s needs and be the most cost-effective?  802.11n  802.11ax  802.11g  802.11ac NEW QUESTION 21NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?  One 3810M 40G 8 HPE Smart Rate switch  Two 2930F 24-port POE+ switches  Two 2930M 24-port POE+ switches  One 2930M 48-port POE+ switch NEW QUESTION 22A wiring closet with a POE+ switch is 250 feet (76 meters) away from an AP on a building floor. The AP’s smart-rate port is connected to a smart-rate port on the switch, which is capable of 10 Gbps. The cable type is Cat5e STP. What is the maximum speed that the customer can expect from the connected AP?  2.5 Gbps  1 Gbps  5 Gbps  10 Gbps NEW QUESTION 23A network architect is doing a site survey for a new wireless design One concern the company has with the old wireless network is coverage. In some cases, APs would lose power and some employees in the network would lose wireless connectivity. The new design needs to prevent this issue from occurring. During the site survey, what are best practices to be followed in regards to the dBm signal level and the power of the AP to ensure adequate wireless coverage and minimal overlap of AP signals for the new design?  AP power at 75% and a measurement of -90 dBM on the measuring device  AP power at 100% and a measurement of -65 dBM on the measuring device  AP power at 75% and a measurement of -80 dBM on the measuring device  AP power at 50% and a measurement of -65 dBM on the measuring device NEW QUESTION 24A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?  Active  Virtual  Passive  Spectrum clearing NEW QUESTION 25A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.How many Aruba LIC-VIA licenses does the company need to purchase for this solution?  100  1  1,030  130 NEW QUESTION 26A customer has a need to track traffic patterns and anomalies on a pair of ArubaOS-CX 8400 series switches. Which technology will the customer need to deploy for these switches?  Mobility First  NetEdit  Network Analysis Engine  2 CiearPass NEW QUESTION 27A customer currently has sets of three Aruba 5406R switches deployed for an access layer in multiple wiring closets in a building They are clustered in a VSF domain The customer wants to set up Multiple Active Detection (MAD) for the OOBM port, as well as use this port for remote management access. To simplify the connectivity, the customer wants to connect these three switches’ OOBM ports to a separate switch in the wiring closet for the OOBM connectivity.Which would be the most cost-effective solution that would meet the customer’s requirements?  2530  5406R  2930F  2930M NEW QUESTION 28A network architect is designing a new Wi-Fi solution for a small university The solution will involve two mobility controllers that will be clustered at the campus core Because students use a lot of video in both the dormitory rooms and in the classrooms, the solution will need to support 50Gbps via link aggregation between the controllers and core switches.Which solution would most cost-effectively meet this requirement for the campus core?  Aruba 7220 mobility controllers and 3810M switches  Aruba 7210 mobility controllers and 5406R switches  Aruba 7240XM mobility controllers and 3810M switches  Aruba 7280 mobility controllers and 5406R switches NEW QUESTION 29Which IRIS option will automatically create a project with a blank preconfigured Site-1 ?  New Campus  New Express Mode  New Project  New Site NEW QUESTION 30A network architect is designing a new wired and wireless solution for for a company. The company has two buildings on a campus, which each building has three floors. The campus core will be placed in the basement of Building 1. Each wiring closet has eight strands of multi-mode OM3 grade fiber that connect to a wiring closet of the first floor of the building it is contained, referred to as a main distribution frame (MDF). The maximum distance between a floor’s wiring closet and the MDF is 100 feet (30 meters). The maximum distance between the two MDFs and the campus core is no more than 150 feet (45 meters). There are eight strands of multi-mode OM3 grade fiber from these two MDF closets to the campus core.Based on this information, which type of design should be used and what is the maximum speeds supported all uplinks for the existing the multi-mode fiber?  three-tier and 10 Gbps  three-tier and 40 Gbps  two-tier and 10 Gbps  two-tier and 40 Gbps NEW QUESTION 31A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?  Only 802.11ax and 8011.ac  Only 802.11ax  Only 802.11ax,802.1lac, and 802.l1n  Only 802.11ax,802.11ac, 802.11n, and 802.11a NEW QUESTION 32A network architect plans to use two ArubaOS 5406 switches in a wiring closet configured in a VSF domain The VSF link requires a 40 GDps connection Which SFP+ transceiver solutions would meet this requirement?  QSFP+ LC  SFP  SmartRate  QSFP28 NEW QUESTION 33Which component uniquely defines the BSSID when implementing an employee SSID?  Case-sensitive SSID name  Radio MAC address  Wireless device MAC address  Case-insensitive SSID name NEW QUESTION 34A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective’?  VSX  VSF  Backplane stacking  Distributed trunking NEW QUESTION 35A network architect is designing a new Wi-Fi solution for a customer The customer currently occupies a one-story building on a small campus. In one part of the building there is an auditorium, where the ceiling height and attenuation is different from the rest of the building. What should the network architect create in VisualRF to identify this difference when planning :ne APs?  Define the appropriate properties in the Network View  Create a Region in the Floorplan View  Spit the Building View into two Floorplan Views  Define the appropriate properties in the Building View NEW QUESTION 36A customer requires a campus core virtualization solution that supports a dual control and management planes, as well as active-active forwarding paths. Which solution would meet the customer’s requirements?  Mesh stacking  VSX  Backplane stacking  VSF NEW QUESTION 37A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?  802.11r  802.11 ax  S02.11V  S02.11h NEW QUESTION 38A network architect is designing a new wireless solution for a company The company needs seamless roaming and client and AP active load balancing. The company also requires an Aruba Mobility Master (MM) to manage the wireless infrastructure. Which Aruba feature does the architect need to include in the design?  Clustering  AirMatch  Client Match  IAP VC NEW QUESTION 39A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?  40  80  60  100 NEW QUESTION 40Which AP mode allows an AP to operate autonomously?  IAP  AM  RAP  OCAP  Loading … Prepare Top HP HPE6-A66 Exam Audio Study Guide Practice Questions Edition: https://www.validbraindumps.com/HPE6-A66-exam-prep.html --------------------------------------------------- Images: https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-21 12:40:38 Post date GMT: 2022-07-21 12:40:38 Post modified date: 2022-07-21 12:40:38 Post modified date GMT: 2022-07-21 12:40:38