This page was exported from Free valid test braindumps [ http://free.validbraindumps.com ] Export date:Sat Apr 5 14:25:31 2025 / +0000 GMT ___________________________________________________ Title: Validate your 300-510 Exam Preparation with 300-510 Practice Test (Online & Offline) [Q43-Q58] --------------------------------------------------- Validate your 300-510 Exam Preparation with 300-510 Practice Test (Online & Offline) Get all the Information About Cisco 300-510 Exam 2022 Practice Test Questions What is the duration, language, and format of Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam Duration of Exam: 90 minutesValidity: 3 yearsLanguage of Exam: EnglishFormat: Multiple choice   Q43. Refer to the exhibit. R3 is:* failing to accept multicast RP information from Domain-A* advertising MSDP SA messages to R1 and R4* receiving SA messages only from R4Which command must the engineer implement to resolve the issue?  R3# ip msdp sa-filter in 192.168.3.1  R3# no ip msap sa-filter in 192.168.1.1  R3# no ip msdp peer 192.168.1.1  R3# ip msdp sa-filter out 192.168.1.1 https://allthingsnetworking.wordpress.com/2014/06/27/pim-msdp-sa-filter/Q44. Which statement about enabling segment routing for IGPs is true?  Segment routing must first be enabled under then routing process and then globally  Segment routing must first be enabled globally and then under the routing process  Segment routing can be enabled only under the routing process  Segment routing can be enabled only globally Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/seg_routing/configuration/xe-16-6/segrt-xe-16-6- book/sr-ospfv2-node-sid.htmlQ45. Refer io the exhibit. While applying the configurations on two routers an engineer notices that OSPF adjacency Between them remains down. Through the ping test the engineer confirmed that both me routers have Layer 3 reachability between them. Which action should me engineer take to make the adjacencies to full?  Enter the command ip ospf authentication in R2 interface  Enable OSPF just inside the router OSPF process not in the interfaces of any router  Delete the area 0 authentication message-digest command from the OSPF process in R1  Delete the area 0 authentication message-digest command from the OSPF process in R2 Q46. Refer to the exhibit.Which attribute can router 1 alter so that only other iBGP peers prefer to use 192.168.4.2 as the next hop for route 192.168.3.0/24?  MED  local preference  origin  weight Q47. In a PIM-SM environment, which mechanism determines the traffic that a receiver receives?  The receiver explicitly requests its desired traffic from the RP on the shared tree.  The receiver explicitly requests traffic from a single source, which responds by forwarding all traffic.  The RP on the shared tree floods traffic out of all PIM configured interfaces.  The receiver explicitly requests traffic from each desired source, which responds by sending all traffic. Q48. Refer to the exhibit.The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?  192.168.3.2  192.168.1.6  192.168.3.6  192. 168.1.2 Q49. Refer to the exhibit. R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3 is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between BGP peers R1, R2 and R1, R3 is true?  The BGP session does not come up between R1 and R2 and between R1 and R3.  The BGP session comes up between R1 and R2 and between R1 and R3.  The BGP session comes up between R1 and R3, but not between R1 and R2.  The BGP session comes up between R1 and R2, but not between R1 and R3. Q50. Refer to the exhibits. All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?  Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.  Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.  Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.  Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process. Q51. Which difference should be considered when intradomain or interdomain multicast routing is implemented?  Interdomain multicast routing requires an IS-IS or OSPF neighbor relationship between the domains but intradomain multicast routing requires only BGP Questions & Answers PDF P-57  Interdomain multicast routing relies on PIM-DM and intradomain multicast routing relies on PIM- SM.  interdomain multicast routing uses BIDR-PIM to establish neighbor relationships between AS and interdomain multicast routing uses MSDP  A network uses intradomain multicast routing without interdomain routing but networks that use interdomain multicast routing must also apply intradomain routing Q52. Refer to the exhibit.Which task must you perform on interface g1/0/0 to complete the SSM implementation?  configure OSPFv3  enable CDP  disable IGMP  configure IGMPv3 Q53. Refer to the exhibit.After these configurations were applied to routers R1 and R2. the two devices cannot form a neighbor relationship What is the reason tor the problem?  The two routers have the same area ID.  The two routers have different iS-types  The two routers have the same network ID  The two routers cannot authenticate with one another Q54. Refer to the exhibit. An engineer is addressing an IS-IS design issue which is running within the topology.All links are running on FastEthernet, except the link between R5 and R4, which is Gigabit Ethernet.Which statement about the design is true?  R4 prefer to reach R5 using R1 as the next hop  All links have equal cost if the default metric is used  R5 prefers to use R4 as the next hop for all routes  R1 prefer to use R5 as the next hop to reach R4 Q55. Refer to the exhibit.Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?  It must be configured for graceful restart  It must be configured with a route reflector  It must be configured with send labels  It must be configured with PIC edge Q56. Refer to the exhibit.A network operator is working to filter routes from being advertised that are covered under an aggregate announcement. The receiving router of the aggregate announcement block is still getting some of the more specific routes plus the aggregate. Which configuration change ensures that only the aggregate is announced now and in the future if other networks are to be added?  Configure the summary-only keyword on the aggregate command  Set each specific route in the AGGRO policy to drop instead of suppress-route  Filter the routes on the receiving router  Set each specific route in the AGGRO policy to remove instead of suppress-route Q57. Refer to the exhibit. Which router does R1 install as an alternate next hop when trying to reach R3 if LFA is enabled?  R5  R3  R4  R2 Q58. Refer to the exhibit.Router 1 has attempted to establish a Cisco MPLS TE tunnel to router 2, but the tunnel has failed. Which statement about this configuration is true?  Router 1 must define an explicit path to router 2  Router 1 and router 2 must define the RSVP bandwidth reserved on the physical interfaces  Router 2 must have a tunnel interface created with router 1 as the destination  Router 1 must have Cisco MPLS TE enabled on interface gigabitethernet0/1  Loading … For more info read reference: Exam Guide Study Materials Topics of Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam These core topics of 310-510 SPRI practice test listed below are general recommendations for the material that is likely to be used for the examination. However, on any delivery of the test, other similar topics could also appear. The guidelines below can update at any time without notice to better represent the contents of the 310-510 SPRI exam dumps pdf and for clarity purposes. It is recommended that, where possible, the applicant use these courses and/or other resources to provide background information on the exam objectives. The syllabus for the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) examination is listed below in detail for each section of 300-510 SPRI exam dumps: Implement and verify MPLSImplement Multiarea IS-ISInfluencing Border Gateway Protocol Route SelectionImplement BGP security optionsImplement BGP Security OptionsImplement Cisco MPLS TEImplementing PIM-SM ProtocolDescribe and compare core multicast conceptsImproving BGP Convergence and Implementing Advanced OperationsTroubleshooting Routing ProtocolsDescribe how traffic engineering is used in segment routing networksImplement and troubleshoot MPLS traffic engineeringScaling BGP in Service Provider NetworksImplement Rendezvous Point DistributionImplementing Segment RoutingImplement BGP Route ReflectorsIntroducing Routing Protocol Tools, Route Maps, and Routing Policy LanguageImplementing and Verifying MPLSDeploying IPv6 Tunneling MechanismsImplement and verifying the PIM-SM protocolImplement advanced features to improve convergence in BGP networksImplement mechanisms for dynamic Rendezvous Point (RP) distributionDescribing Segment Routing Traffic Engineering (SR-TE)Implementing Route RedistributionConfigure and Verify Interior Gateway Protocol (IGP) Segment RoutingImplement MPLS in the Service Provider CoreSecuring BGP in Service Provider NetworksImplement OSPF Special Area Types (IPv4 and IPv6)Implementing Interdomain IP MulticastImplement Route RedistributionTroubleshoot OSPF, ISIS, and BGPImplement Tunnels for IPv6Implement PIM-SM EnhancementsInfluence BGP Route SelectionImplementing PIM-SM EnhancementsImplement enhanced Protocol-Independent Multicast - Sparse Mode (PIM-SM) featuresEnable and Optimize PIM-SMImplement Multicast Source Discovery Protocol (MSDP) in the interdomain environmentImplement IPv6 tunneling mechanismsImplement and verify segment routing technology within an interior gateway protocolImplementing IP Multicast Concepts and TechnologiesImplementing and Verifying Open Shortest Path First Multiarea Networks   Check Real Cisco 300-510 Exam Question for Free (2022): https://www.validbraindumps.com/300-510-exam-prep.html --------------------------------------------------- Images: https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-08-29 10:02:06 Post date GMT: 2022-08-29 10:02:06 Post modified date: 2022-08-29 10:02:06 Post modified date GMT: 2022-08-29 10:02:06