This page was exported from Free valid test braindumps [ http://free.validbraindumps.com ] Export date:Sat Apr 5 10:45:22 2025 / +0000 GMT ___________________________________________________ Title: [Oct-2022] Pass EMC DES-1221 Exam in First Attempt Guaranteed! [Q27-Q49] --------------------------------------------------- [Oct-2022] Pass EMC DES-1221 Exam in First Attempt Guaranteed! Full DES-1221 Practice Test and 62 unique questions with explanations waiting just for you, get it now! NO.27 What does the remote replication Failover operation do?  Fully synchronizes the source and destination data states and reverses the replication direction  Fully synchronizes the source and destination data states and stops the current replication session  Promotes the destination system to production with its replica data consistent to the last successful RPO synchronization state  Promotes the destination system to production and resets the RPO synchronization cycle in the protection policy Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-25-dae/pwrstr-protect-data/replication?guid=guid-7641aeec-982e-4e4e-85fb-c50f525635db&lang=en-usNO.28 What is a requirement for the Import External Storage migration feature?  PowerStore Global Storage Discovery IP address must be configured  PowerPath host-based multipathing software  PowerStore LACP bonded ports are tagged for replication  Direct Fibre Channel connections between storage systems NO.29 Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure. Reference:https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/cable-the-base-enclosure-to-the-expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-usNO.30 Refer to the Exhibit.A Network administrator is failing to discover a PowerStore T system using the PowerStore Discovery Utility. What might be the issue?  Discovery network uses only native VLAN  Port 54 needs to be enabled  Dedicated port needs to be used for discovery network  Port 54 has not been set to trunk mode NO.31 What is the logical block size when creating and formatting volumes on PowerStore for Windows hosts?  512 bytes  520 bytes  4096 bytes  64 kilobytes NO.32 How many cables are required for minimum support for PowerStore T Front-End storage connectivity?  1  2  4  6 NO.33 Match the CLI command to the appropriate configuration. NO.34 A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?  Configure VLT and Link Aggregation Control Protocol  Implement VLT and Dynamic Link Aggregation Group  Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group  Implement Dynamic Link Aggregation Group Reference: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/h18157- dell-emc-powerstore-clustering-high-availability.pdfNO.35 An administrator assigns a protection policy to a volume group. Volume1, Volume2, Volume3 are put into the volume group. Later it is decided that Volume2 should be replicated at a different time. Volume2 is removed from the volume group. The administrator attempts to assign a new protection policy to Volume2 and the option is greyed out.Why is the option greyed out?  Already has a protection policy from the Volume-Group  Requires a replication rule not a protection policy  Requires a snapshot rule and a replication rule  Still has associated Volume-Group snapshots NO.36 Which network is used by the PowerStore for communication to the cluster database?  inter-node  ICM  IDN  ICD Explanation/Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000t/pwrstr-ntwk-plang/powerstore-t- model-appliance-networks?guid=guid-97a3e988-c1bc-4f51-a445-3af23f19da1bNO.37 What is the recommended Windows multi-pathing policy for block volumes on a PowerStore array?  Least QueueDepth  Round-Robin  FailOver  Least Weighted Paths NO.38 What describes the Import External Storage feature?  An external plugin feature for hosts to tune application workload IO on PowerStore NVMe based storage  A native network configuration feature of PowerStore that configures external Ethernet switching for PowerStore installation  A feature external to PowerStore that orchestrates vMotion movement of virtual machines onto PowerStore X systems  A native data migration feature of PowerStore that imports external block storage to PowerStore Reference: https://www.dell.com/support/manuals/en-pk/powerstore-1000/pwrstr-import/importing-external- storage-to-powerstore-overview?guid=guid-6fef77c4-d4c9-49c6-8de2-efd67aa52ca5NO.39 An administrator is trying to set a performance policy while creating a Thin Clone of a volume group. Why is the option to set performance policy unavailable?  Volumes in the volume group are not mapped to any hosts  No Volumes are added in the volume group  Thin Clones cannot be created using a volume group  Performance policy can only be set on a Thin Clone volume Reference:https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-cfg-vols/remove-a-volume-from-a- volume-group?guid=guid-4b974223-26e4-40fe-a1b8-01beb210c305&lang=en-usNO.40 Match the correct Base Enclosure port in column A to the Expansion Enclosure port in column B to show the correct cabling for adding a single expansion enclosure to a base enclosure. Reference:https://www.dell.com/support/manuals/en-pk/powerstore/pwrstr-isg/cable-the-base-enclosure-to-the- expansion-enclosure?guid=guid-d68d049f-2b77-489f-b1ab-553f4f3de8aa&lang=en-usNO.41 Correctly arrange the sequence of the write operation in PowerStore. NO.42 Match the CLI command to the appropriate configuration. NO.43 Use the simulator to determine how many logical ports are currently marked for replication on the PowerStore appliance.Note: It is necessary to close (x) the simulator window before you can select a response to this question.  1  2  4  6 NO.44 Which ports are recommended for use as the interconnect between the two Dell supplied Data Switches connected to PowerStore?  Two 10 GigE  Two 25 GbE  Two 100 GigE  Four 1 GbE NO.45 Which API does PowerStore use to communicate with ESXi server during vVols provisioning operation?  REST  SOAP  VAAI  VASA ExplanationVASA is a VMware-defined API meant to provide a common way for VMware to integrate with storage vendors. The API is implemented using an out-of-band, Simple Object Access Protocol (SOAP) over HTTPS.Reference: https://volumes.blog/2020/05/06/what-is-powerstore-part-4-vvols/NO.46 You are a network administrator that needs to setup a Data switch model S5248F-ON to be used for PowerStore 7000T system Use the Simulator to:1) Check the OS version and license status.2) Set management IP address 172.17.57.10 subnet as 255.255.255.0 on chassis = 1, slot = 1, port = 103) Enable the port4) Configure default route with gateway 192.168.1.254, NTP server 192.168.1.505) Enable RSTP with priority 40966) Commit and exit. Below are the exhibits solution for this simulation.NO.47 A PowerStore T administrator discovers that only one port on each node is active and passing traffic. The other port is healthy and online, but total bandwidth is only half of what the customer expects. Which action could resolve the issue?  Configure VLT and Link Aggregation Control Protocol  Implement VLT and Dynamic Link Aggregation Group  Configure Link Aggregation Control Protocol and Dynamic Link Aggregation Group  Implement Dynamic Link Aggregation Group Explanation/Reference: https://www.delltechnologies.com/resources/en-us/asset/white-papers/products/storage/ h18157-dell-emc-powerstore-clustering-high-availability.pdfNO.48 1.a.1 What is the maximum number of appliances that can be connected to form a cluster?  1 in a PowerStore T cluster, 4 in a PowerStore X cluster  1 in a PowerStore T cluster, 1 in a PowerStore X cluster  4 in a PowerStore T cluster, 4 in a PowerStore X cluster  4 in a PowerStore T cluster, 1 in a PowerStore X cluster NO.49 What is the final configuration step when installing the ImportKit for a Windows host accessing VNX2 storage?  Select the folder location on the host for the program installation  Select the RSA key for configuring the control path HTTPS certificate  Configure the network port and interface for the host data path  Configure the network port and interface for the management control path  Loading … Get Latest DES-1221 Dumps Exam Questions in here: https://www.validbraindumps.com/DES-1221-exam-prep.html --------------------------------------------------- Images: https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-10-25 16:27:07 Post date GMT: 2022-10-25 16:27:07 Post modified date: 2022-10-25 16:27:07 Post modified date GMT: 2022-10-25 16:27:07