[Feb 05, 2023] JN0-363 Practice Exam Dumps - 99% Marks In Juniper Exam [Q93-Q109] : Free valid test braindumps : http://free.validbraindumps.com

QUESTION 93
Which two statements describe operations performed by the encapsulating tunnel endpoint in an IP-IP tunnel? (Choose two.)

It decrements the time-to-live (TTL) counter by one in the inner IP header

It modifies the source and destination addresses in the inner IP header

It adds an outer IP header with the destination address of the remote tunnel endpoint

It creates and adds a new inner IP header with the remote destination device’s IP address

QUESTION 94
Click the Exhibit button.

Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.
Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?

The GRE header adds 20 bytes to the packet

The GRE header adds 24 bytes to the packet

The IP header adds 20 bytes to the packet

The IP header adds 24 bytes to the packet

QUESTION 95
Exhibit

Referring to the exhibit, what is the minimum number of LSPs required to support alt four networks?

QUESTION 96
Click the Exhibit button.

Referring to the exhibit, which statement is correct?

R2 will be the designated router

R3 will not participate in the election process

R1 will not participate in the election process

R4 will be the designated router

QUESTION 97
Click the Exhibit button. What does IS-IS/18 mean in the output displayed in the exhibit?

These routes are internal Level 1 routes.

These routes are internal Level 2 routes.

These routes are external Level 1 routes.

These routes are external Level 2 routes.

QUESTION 98
Exhibit

The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

QUESTION 99
Click the Exhibit.

Referring to the configuration shown in the exhibit, which statement is true?

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.2.

Traffic destined to address 192.168.5.1 will alternate between next-hops 172.16.1.2 and 172.16.1.3

Traffic destined to address 192.168.5.1 will take next-hop 10.0.1.1.

Traffic destined to address 192.168.5.1 will take next-hop 172.16.1.3.

QUESTION 100
Which two LSA types are permuted in OSPF totally stubby areas? (Choose two.)

Type 1

Type 3

Type 5

Type 7

QUESTION 101
Click the Exhibit button. Based on the configuration shown in the exhibit, what will be the state of the IS-IS levels on interface ge-0/0/0.100?

Level 1 is enabled and Level 2 is disabled.

Level 1 is disabled and Level 2 is enabled.

Level 1 is enabled and Level 2 is enabled.

Level 1 is disabled and Level 2 is disabled.

QUESTION 102
Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)

ring

tree

star

mesh

QUESTION 103
Referring to the exhibit, what will happen to untagged frames?

The untagged frames are dropped.

The untagged frames are load balanced between VLAN 10 and VLAN 20.

The untagged frames are associated with VLAN 10.

The untagged frames are associated with VLAN 20.

QUESTION 104
Click the Exhibit.

You have configured the IBGP group shown in the exhibit. However, committing your configuration fails.
Which parameter should you add to the IBGP group configuration to correct the problem?

Type external

Type internal

Export <policy name>

As -override

QUESTION 105
Click the Exhibit button.

You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish.
Referring to the exhibit, which statement correctly identifies the problem?

Hello and dead timers are not matching between R1 and R2

R1 does not have a router ID defined

R1 and R2 have the same router ID

R2 has a wrong area configured

QUESTION 106
The exhibit shows a topology with 1 Gbps interfaces between routers, and four RSVP LSPs operating with the respective bandwidth reservations.
Which path will be selected for a new LSP from R4 to R6 with a bandwidth reservation of 400 Mbps?

R4 -> R1 -> R2 -> R5 -> R6

R4 -> R5 -> R6

R4 -> R5 -> R2 -> R3 -> R6

R4 -> R1 -> R2 -> R3 -> R6

QUESTION 107
Exhibit

You confirm that the R2 and R3 routers are receiving a BGP route to the 203.0.113.0/24 network, but both routers display the route as hidden. Referring to the exhibit, which two actions solve this problem? (Choose two.)

Apply the routing policy on R1 as an export policy to the IBGP group.

Apply the touting policy on R1 as an Import policy to the IBGP group.

Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for IBGP peering.

Configure a routing policy on R1 that sets the next hop for the 203.0.113.0/24 BGP route to the IP address that R1 uses for EBGP peering.

QUESTION 108
Click the Exhibit.

Referring to the exhibit, which IS-IS router will be selected as the DIS?

Router 1

Router 4

Router 2

Router 3

QUESTION 109
Which two statements are correct regarding VPLS mesh groups? (Choose two.)

Unicast packets destined to another PE router within the same mesh group are dropped by the local PE router.

Unicast packets destined to another PE router in a different mesh group are dropped by the local PE router.

Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all local CE routers.

Broadcast, multicast, and unicast packets of unknown origin received from a PE router are flooded to all remote PE routers.

[Feb 05, 2023] JN0-363 Practice Exam Dumps - 99% Marks In Juniper Exam [Q93-Q109]

Juniper JN0-363 Exam Topics: