This page was exported from Free valid test braindumps [ http://free.validbraindumps.com ] Export date:Sat Apr 5 8:26:52 2025 / +0000 GMT ___________________________________________________ Title: [Feb 14, 2024] Step by Step Guide to Prepare for 350-501 Exam BrainDumps [Q11-Q33] --------------------------------------------------- Feb 14, 2024 Step by Step Guide to Prepare for 350-501 Exam BrainDumps CCNP Service Provider 350-501 Real Exam Questions and Answers FREE Updated on 2024 Exam Details Cisco 350-501 is a core exam and the applicants will have 120 minutes to cover all the questions of its content. There will be about 90-110 items that can be presented in the following formats: multiple choice, drag and drop, testlets, or fill-in-the-blank. The students are required to gain about 750-850 points for passing this test. Please note that this certification exam is available in English only. Moreover, the test takers have to be ready to pay the fee of $400. This payment allows them to register and schedule the exam through the Pearson VUE platform that provides them with the opportunity to choose the appropriate delivery option. Thus, if you want to take Cisco 350-501 from the comfort of your office or home, you can opt for online testing. On the other hand, you can choose the in-person variant and have the exam at one of the Cisco testing centers.   NEW QUESTION 11You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tunnel’s router?  error  reservation  path  tear NEW QUESTION 12Whtch two routing protocols support Cisco MPLS TE tunnels? (Choose two.)  IS-IS  RIP  BGP  OSPF  EIGRP NEW QUESTION 13Refer to the exhibit:R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1. these log messages are seen.Which command can be configured on routers R1 and R2 on fO/O interfaces to form OSPF adjacency?  ip ospf network non-broadcast  ip ospf network point-to- multipoint non-broadcast  ip ospf network point-to-point  ip ospf network broadcast NEW QUESTION 14Which Cisco software OS uses monolithic architecture?  NX-OS  IOS XE  IOS XR  IOS Cisco Internetwork Operating System (IOS) is the software used on most Cisco Systems routers and current Cisco network switches. IOS is a package of routing, switching, internetworking and telecommunications functions integrated into a multitasking operating system. IOS uses a monolithic architecture, meaning that all processes run in a single address space, making it a single-image system.NEW QUESTION 15Refer to the exhibit. Assume all other configurations are correct and the network is otherwise operating normally.Which conclusion can you draw about the neighbor relationship between routers R1 and R2?  The neighbor relationship is up.  The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family.  The neighbor is down because the local-as value for R2 is missing in the R1 neighbor statement.  The neighbor relationship is down because R1 believes R2 is in AS 65012. Section: NetworkingNEW QUESTION 16Refer to the exhibit:What is the URL used for with REST API?  It is used to contact a URL filter to determine the efficacy of a web address  It is used to send a TACACS+ authentication request to a server  It is used to send a message to the APIC to perform an operation on a managed object or class operator  It is used to initiate an FTP session to save a running configuration of a device. NEW QUESTION 17The network operation center is receiving an excessive number of BFD alerts.This is due to recently configured high-speed links that result in BGP session teardown.Engineers tried to modify the BFD timers, but no improvement was noticed.Which action maximizes network stability?  enable the BFD Dampening feature  fully remove the BFD configuration  modify the IGP hello timers  enable the BGP Dampening feature NEW QUESTION 18Refer to the exhibit:When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.Which factor should be the reason for this situation?  LDP needs to be enabled on the R2 physical interface  R2 does not see any hellos from R1  LDP needs to be enabled on the R2 loopback interface  R2 sees the wrong type of hellos from R1 NEW QUESTION 19Refer to the exhibit:What is significant about the number 2 in the configuration?  It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent  It dictates the number of sessions that can be open with the SNMP manager  It indicates two SNMP managers can read and write with the agent using community string cisco test  It represents the version of SNMP running NEW QUESTION 20Refer to the exhibit:Which statement about the status of the neighbor relationship between R1 and R2 is true?  The neighbor relationship is down because the two routers are configured with different area types  The neighbor relationship is down because the two routers are in the same subnet.  The neighbor relationship is up because R2 is level 1 and level 2 router.  The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area NEW QUESTION 21Refer to the exhibit:What does this value mean when it is received in XML?  It shows the ending of the script  It indicates a break in a sequence  It indicates a value assigned by a network administrator to tag a route  It means a data fie4d is blank NEW QUESTION 22When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not taking the expected path in the core.Which command do you use to quickly check path of a TE tunnel?  traceroute mpls ipv4 <tunnel destination>  ping <tunnel destination IP>  show mpls traffic-engineering tunnels  traceroute <tunnel destination IP> NEW QUESTION 23An engineering team must implement Unified MPLS to scale an MPLS network. Devices in the core layer use different IGPs, so the team decided to split the network into different areas. The team plans to keep the MPLS services as they are and introduce greater scalability. Which additional action must the engineers take to implement the Unified MPLS?  Redistribute the IGP prefixes from one IGP into the other routers to ensure end-to-end LSPs.  Configure the ABR routers as route reflectors that redistribute IGP into BGP.  Redistribute the IGP prefixes into another IGP to ensure end-to-end LSPs.  Move the IGP prefixes into IS-IS as the loopback prefixes of the PE routers to distribute the prefixes to other routers to create end-to-end LSPs. NEW QUESTION 24Refer to the exhibit.An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH Protocol.Which two actions must the engineer implement to complete the SSH configuration? (Choose two.)  Configure an IP domain name.  Configure service password encryption.  Configure crypto keys  Configure ACL 100 to permit access to port 22.  Configure a password under the vty lines. NEW QUESTION 25Drag and drop the descriptions from the left onto the corresponding OS types on the right. ExplanationIOS XE:It uses linux-based kernelIt has a separate control planeIOS:It is monolithicIt shares memory spaceNEW QUESTION 26Refer to the exhibit. A network engineer is implementing a BGP routing policy.Which effect of this configuration is true?  All traffic that matches acl10 is allowed without any change to its local-preference  All traffic that matches acl10 is dropped without any change to its local-preference  If traffic matches acl10, it is allowed and its local-preference is set to 300  All traffic is assigned a local-preference of 30O regardless of its destination NEW QUESTION 27Refer to the exhibit.What type of configuration is it?  It is configuration that requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.  It is configuration that requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.  It is configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.  It is configuration that requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run. NEW QUESTION 28Refer to the exhibit.Refer to the exhibit. A network engineer is implementing multicast Source-A to send a multicast stream for Receiver-A, and multicast Source-B to send a multicast stream for Receiver-B. Router RC forwards the IGMP host a report and leaves messages to IP address 192.168.10.1. How must the multicast features be implemented to prevent RB from receiving multicast flooding from Source-A?  Change the helper-address value to 192.168.10.2 on RC.  Enable ip pim neighbor-filter on RC interface Ge0/0.  Configure PIM-SSM on RB and RC interface Ge 0/0.  Enable ip pim passive on RB interface Ge0/0. NEW QUESTION 29A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LS A.Which command enables this feature?  nsf ietf helper disable  nsf cisco enforce global  nsf ietf helper strict-lsa-checking  nsf Cisco helper disable NEW QUESTION 30Drag and Drop QuestionDrag and drop the technologies from the left onto the correct definitions on the right. NEW QUESTION 31Refer to the exhibit.If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain?  virtual link between RB and RC  sham link  more specific route  default route NEW QUESTION 32Drag and drop the LDP features from the left onto their usages on the right. NEW QUESTION 33What is a feature of mVPN?  It requires-uncast to be disabled on the multicast domain  It establishes multiple static MDTs for each multicast domain.  It provides the ability to support multicast over a Layer 3 VPN.  It requires the no ip mroute-cache command to be configured on the loopback interface of each BGP peer  Loading … To prepare for the Cisco 350-501 exam, candidates can attend training courses, study relevant books and resources, and practice with lab equipment. Cisco also provides online resources and practice exams to help candidates prepare for the certification. Passing the exam requires a thorough understanding of the topics covered, as well as practical experience in working with service provider networks.   Ultimate Guide to Prepare 350-501 Certification Exam for CCNP Service Provider: https://www.validbraindumps.com/350-501-exam-prep.html --------------------------------------------------- Images: https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif https://free.validbraindumps.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2024-02-14 09:29:26 Post date GMT: 2024-02-14 09:29:26 Post modified date: 2024-02-14 09:29:26 Post modified date GMT: 2024-02-14 09:29:26