[Q30-Q53] Real Exam Questions 303 Dumps Exam Questions in here [Sep-2026]

[Q30-Q53] Real Exam Questions 303 Dumps Exam Questions in here [Sep-2026]

Rate this post

Real Exam Questions 303 Dumps Exam Questions in here [Sep-2026]

Get Latest Sep-2026 Conduct effective penetration tests using 303

NO.30 Refer to the exhibit. Which two pool members are eligible to receive new connections? (Choose two)

 
 
 
 
 

NO.31 An ecommerce company is experiencing latency issues with online shops during Black Friday’s peak season. The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device. Where should the BIG-IP Administrator determine the problematic Virtual Servers?

 
 
 
 

NO.32 One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.
Prior to removing the device group, which action should be performed?

 
 
 
 

NO.33 An application requires load balancing functionality. The application must beencrypted to the client.
Certain content must be manipulated by the following IRule:

Which set of profiles must be applied to the virtual server?

 
 
 
 

NO.34 Which step should an LTM Specialist take next to finish upgrading to HD1.3?

 
 
 
 

NO.35 A BIG-IP Administrator configures remote authentication and needs to make sure that users can still login even when the remote authentication server is unavailable. Which action should the BIG-IP Administrators in the remote authentication configuration to meet this requirement?

 
 
 
 

NO.36 A device group is made up of four members: LTM-A, LTM-B, LTM-C, and LTM-D. An LTM Specialist makes a configuration change on LTM-B. Later, a different LTM Specialist notices a “changes pending” message on all devices. When logged into LTM-D, the LTM Specialist attempts to config-sync to the device group. The sync operation fails.
Why is the LTM Specialist on LTM-D unable to synchronize the configuration to the group?

 
 
 
 

NO.37 An TLM Specialist has an Exchange that must use the LTM device to route traffic to the internet.
Which SNAT/NAT configure allows the Exchange server’s traffic access the internet through the LTM device?

 
 
 
 

NO.38 A BIG-IP Administrator plans to resolve a non-critical issue with a BIG-IP device in 2 weeks. What Severity level should be assigned to this type of F5 support ticket?

 
 
 
 

NO.39 An LTM HTTP pool has an associated monitor that sends a string equal to ‘GET /test.html’.
Which two configurations could an LTM Specialist implement to allow server administrators to disable their pool member servers without logging into the LTM device? (Choose two.)

 
 
 
 
 

NO.40 Refer to the exhibits. An LTM Specialist is troubleshooting an issue with one of the virtual servers on an LTM device, and all requests are receiving errors. Testing directly against the server generates no errors. The LTM Specialist has captured the request and response on both client and server sides of the LTM device. What should the LTM Specialist do to fix this issue?

 
 
 
 

NO.41 Refer to the exhibit

A connection is being established to IP 1.1.1.1 on port 8080.
Which virtual server will handle the connection?

 
 
 
 

NO.42 The three VLANS shown provide connectivity to backend servers. The backend servers are being moved to unmanaged switches and require separate interfaces. How should the F5 device interfaces be configured?

 
 
 
 

NO.43 Given:
Filesystem Size Used Avail Use% Mounted on
/dev/md11 248M 248M 0 100% /
/dev/md13 3.0G 76M 2.8G 3% /config
/dev/md12 1.7G 1.1G 476M 71% /usr
/dev/md14 3.0G 214M 2.6G 8% /var
/dev/md0 30G 2.2G 26G 8% /shared
/dev/md1 6.9G 288M 6.3G 5% /var/log
none 3.9G 452K 3.9G 1% /dev/shm
none 3.9G 19M 3.9G 1% /var/tmstat
none 3.9G 1.2M 3.9G 1% /var/run
prompt 4.0M 12K 4.0M 1% /var/prompt
/dev/md15 12G 8.3G 3.1G 74% /var/lib/mysql
Which command is used to produce this output?

 
 
 
 
 

NO.44 A BIG-IP Administrator reviews the Plane CPU Usage performance chart and discovers a high percentage of Control Plane utilization. Which type of traffic does this indicate a higher usage of?

 
 
 
 

NO.45 — Exhibit –

— Exhibit —
Refer to the exhibit.
A client attempts to connect from a Google Chrome browser to a virtual server on a BIG-IP LTM. The virtual server is SSL Offloaded. When the client connects, the client receives an SSL error. The client receives the same errors when trying Mozilla Firefox and Internet Explorer browsers.
The LTM Specialist does an ssldump on the virtual server and receives the results as per the exhibit.
How should this be resolved?

 
 
 
 

NO.46 A user wants to use the iHealth Upgrade Advisor to determine any issues with upgrading TMOS from 13.0 to 13.1. Where can the user generate the QKView to upload to iHealth?

 
 
 
 

NO.47 An LTM Specialist is configuring a client profile to offload processing a new application Company policy requires that clients can resume session for up to 30 minutes, but must renegotiate a new session after that. Which setting should the LTM Specialist change to satisfy this requirement?

 
 
 
 

NO.48 The picture belongs to static content, you can configure static content cache in FS to meet this demand.
An LTM Specialist must configure session persistence for a highly available, highly utilized web- based application.
The following requirements are provided:
http proxy setup for security persistence information available to the
HA peer in case of failover
The LTM Specialist needs to minimize additional burden on the LTM
device to the greatest extent possible.
Which persistence profile should be used?

 
 
 
 

NO.49 A BIG-IP Administrator is configuring an SSH Pool with five members.
Which Health Monitor should be applied to ensure that available pool members are monitored accordingly?

 
 
 
 

NO.50 Given LTM device ltm log:
Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5: semaphore mcpd.running(1) held Sep 26 20:51:08 local/lb-d-1 notice promptstatusd[3695]: 01460006:5:
Sep 26 20:51:08 local/lb-d-1 warning promptstatusd[3695]: 01460005:4: mcpd.running(1) held, wait for mcpd Sep 26 20:51:08 local/lb-d-1 info sod[3925]: 010c0009:6: Lost connection to mcpd – reestablishing.
Sep 26 20:51:08 local/lb-d-1 err bcm56xxd[3847]: 012c0004:3: Lost connection with MCP: 16908291 …
Exiting bsx_connect.cpp(174)
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: MCP Exit Status Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0012:6: Info: LACP stats (time now:1348717868) :
no traffic
Sep 26 20:51:08 local/lb-d-1 info bcm56xxd[3847]: 012c0014:6: Exiting…
Sep 26 20:51:08 local/lb-d-1 err lind[3842]: 013c0004:3: IO error on recv from mcpd – connection lost Sep 26 20:51:08 local/lb-d-1 notice bigd[3837]: 01060110:5: Lost connection to mcpd with error 16908291, will reinit connection.
Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0004:3: Initial subscription for system configuration failed with error ” Sep 26 20:51:08 local/lb-d-1 err statsd[3857]: 011b0001:3: Connection to mcpd failed with error ‘011b0004:3:
Initial subscription for system configuration failed with error ”’
Sep 26 20:51:08 local/lb-d-1 err csyncd[3851]: 013b0004:3: IO error on recv from mcpd – connection lost
………….skipping more logs…..
Sep 26 20:51:30 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running bcm56xxd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 01140030:5: HA proc_running mcpd is now responding.
Sep 26 20:51:34 local/lb-d-1 notice sod[3925]: 010c0018:5: Standby
Which daemon failed?

 
 
 
 
 

NO.51 An LTM Specialist configures the following iRule on an LTM device:
when HTTP_REQUEST {
if {[string tolower [HTTP::uri]] contains “/URI1/” } {
pool Pool1
}
elseif {[string tolower [HTTP::uri]] contains “/URI2/” } {
pool Pool2
}
elseif {[string tolower [HTTP::uri]] contains “/URI3/” } {
pool Pool3
}
else { pool Pool4}
}
Given
the following request: http://www.example.comURI1/index.html?fu=bar
&pass=1234
Which pool will be selected by the iRule?

 
 
 
 

NO.52 — Exhibit –

— Exhibit —
Refer to the exhibit.
An LTM Specialist is troubleshooting an HTTP monitor that is marking a pool member as down. Connecting to the pool member directly through a browser shows the application is up and functioning correctly.
How should the send string be modified to correct this issue?

 
 
 
 

NO.53 When re-licensing an LTM device from the command line interface, which tmsh command should the LTM Specialist use to generate the required information to provide on the F5 licensing portal?

 
 
 
 

Authentic Best resources for 303 Online Practice Exam: https://www.validbraindumps.com/303-exam-prep.html

         

Related Links: telegra.ph www.stes.tyc.edu.tw myportal.utt.edu.tt myportal.utt.edu.tt myportal.utt.edu.tt www.stes.tyc.edu.tw

Leave a Reply

Your email address will not be published. Required fields are marked *

Enter the text from the image below