Oct 28, 2022 Detailed New 1Z0-1045-21 Exam Questions for Concept Clearance [Q36-Q59]

Rate this post

Oct 28, 2022 Detailed New 1Z0-1045-21 Exam Questions for Concept Clearance

1Z0-1045-21 Exam Preparation Material with New 1Z0-1045-21 Dumps Questions.

QUESTION 36
Your company is looking for a simplified method for managing a group ofreports. Identify the type of report used in WMS Cloud that compiles multiple existing reports into a single document while executing each report in a single order.

CrossTab Report

Express Report

Linked Report

Chained Report

Standard Report

QUESTION 37
Your company wants to use Replenishment Wave to maintain adequate inventory levels to meet customer demand by fulfilling customer’s orders on time.
Which Replenishment Trigger Mode needs to be set up in the Replenishment Template for the following condition?
* For active Location P20A100
* Minimum Volume = 20
* Max Volume = 100
* Percentage of Max = 20%
* Length = 20, Width = 40, Height = 60
* If location P20A100 total volume goes below 20, the location is triggered forreplenishment

Minimum Capacity

Reactive

Order Based

Percentage of Max

QUESTION 38
You are the Inventory Control Supervisor at your employer’s East Coast facility. Your employer is a 3PL, and your customer is a large company that is also serviced out of the other 3PL facilities. As you start the shift, your Inventory Control team members inform you of a significant change in the RF Cycle Counting process.
Lost IBLPNs are now updates with a “00” lockcode rather than the expected “LL” code.
Which scenario is causing this issue?

You dismiss the concern because a change in the lock code has no impact on either the WMS Cloud or host inventories.

Your counterpart at the 3PL’s other facility changed one of the cycle counting company parameters and that impacted your workflow for that same company.

An inventory team member in the other facility marked a lost case with “00” lock code causing all subsequent lost cases to be defaulted to the same code across all LPNs for all company/facility combinations.

While counting LPNs at a location, one of your team members marked a lost case with the new lock code.
The new lock code is stored in system memory and applied to all IBLPNs counted as “Lost”.

Oneof your inventory team members changed his/her RF parameter default lock code causing the same configuration change to propagate to all users in the facility.

QUESTION 39
Select the two routing configurations thatare used to specify routes for outbound loads. (Choose two.)

the Routing Mode on the Carrier UI Screen

the company parameter PACKING_ROUTING_MODE

the Routing Mode on the Wave Template

the Routing_Mode parameter on the Loading RF Transaction

QUESTION 40
Your customer wants to use Advance Shipment Notification (ASN) created in WMS Cloud System for receiving without RF gun and expects ASN to be verified.
What are the two steps to complete the ASN receiving and verification transaction? (Choose two.)

Create a Blind IB plate number and palletize after receiving

Create a Blind IB plate number and cartonize before receiving

Assign a dock door to IB shipment

Create an ASN from the IB license plate screen

Verifythe IB shipment

QUESTION 41
Select two true statements about Group Configuration.(Choose two.)

Only the RF Menu uses the concept of Groups

Users can assign specific access to activities by using Group permissions

Permissions come already pre-assigned to standard Groups in the system and cannot be changed

Users must log outwhen switching Groups

User can belong to multiple Groups

QUESTION 42
Identify the type offunctions you need to use to handle conditional information in a report.

Arithmetic and Geometric Functions

WMS BI Cloud does not support that type of functionality

String Functions

Dynamic Functions

Logical Functions

QUESTION 43
Your client finds it easier to read reports without repeated values. The client shared anexample report to demonstrate the way they want their columns to be displayed.
What action should you take to make your report look like the example report provided by client?
Report A:

Select the Hide Repeated Values icon.

Select the HidCommon Values icon.

Select Chart Wizard, and delete repeated values.

Select the Suppress Duplicate Values icon.

QUESTION 44
Your warehouse isdivided into two large areas, Area A and Area B, which store different products. You have set up your wave to allocate inventory from only Area A, but when the wave is run, both Area A and area B have allocated items.
What caused the issue?

In the Allocation Mode, “Restrict Allocation Zone” was not specified.

In the Allocation Mode, “Restrict Allocation Zone” was set to Area B.

Allocation zone was not specified in the task selection criteria.

Allocation zone was not specified in the shipping order.

The locations in Area A have excessive cycle count tasks against them.

QUESTION 45
Your client wants to create an Advanced Shipment Notification (ASN) automatically after a Purchase Order (PO) is created in the system.
What stepshould they perform?

The user needs to go to the Purchase Order Screen UI and select the “Create IB Shipment” check box

Update the Company Parameter CREATE_ASN_FOR_EACH_PO to Yes on the Company Parameter UI screen

When interfacing the PO, the “create_asn” check box needs to be selected every time

When interfacing the shipment, the PO number should be specified

QUESTION 46
In WMS Cloud, which two statements are true about WMS BI Cloud? (Choose two.)

WMS BI Cloud is availablefor use out of the box

WMS BI Cloud allows users to create reports by creating SQL queries

Tables in WMS BI Cloud are referred to as categories

By default, the WMS BI Cloud functionality is disabled

QUESTION 47
You are performing the Split IB LPNs RF transaction and seeing an error message: Shipment Verification status mismatch.
Which three are valid? (Choose three.)

The from-IBLPNand the to-IBLPN might be received against two different ASNs respectively.

This error message will disappear if the RF screen parameter required-validations is set up as No Validation.

This error message will disappear if the RF screen parameter split-uom is left bank.

If the to-IBLPN is received via the Recv Shipment RF transaction, the from-IBLPN might be from the Create RF transaction.

The from-IBLPN and the to-IBLPN might be received against the same ASN.

QUESTION 48
You have hired a new employee to do picking in the warehouse. The employee complains that he/she cannot work because the RF Picking transactions is notdisplayed as one of the RF options.
Which two scenarios will cause the transaction to be missing as an RF option in the user’s menu? (Choose two.)

The RF Picking transaction is not associated with her/his group’s assigned RF Menu.

The employee’s Group has a blank RF Menu.

The employee is assigned to the “Supervisor” group.

The employee’s email is not set up in his/her user profile.

The employee has forgotten his/her password.

QUESTION 49
Item X has product life as 40 days and % Acceptable as 40%. You are doing receiving for your company via RF and today is Sep. 15th, 2017. The receiving transaction that you use to receiveItem X has left the screen parameter allow-rem-exp-override blank, and has the screen parameter allow-inv-exp-override set to on.
Identify two valid facts. (Choose two.)

When you communicate to the RF that the expiry date of Item X is Sep. 30th, 2017, the system will allow you to receive it.

When you communicate to the RF that the expiry date of Item X is Oct. 25th, 2017, the system will allow you to receive it.

When you communicate to the RF that the expiry date of Item X is Oct. 10th, 2017, the system will allow you to receive it.

Expiry date is the only date value that you can enter via receiving transactions, but it is optional based on the items configuration.

When you communicate to the RF that the expiry date of Item X is Oct.20th, 2017, and there’s an existing inventory of Item X whose expiry date is Oct.4th, the system will allow to receive it.

QUESTION 50
What happens behind the flag Onlydeallocate on Shortin the order typescreen?

The Order Type has no impact on the Picking Process.

When the parameter is set to YES, during short pick, the system will put the order hold status until more inventory is available.

When the parameter is set to Yes, then only the shortedquantity will get deallocated form the order.

When the parameter is set to No, the shorted quantity on the order remains in the “allocated” status.

When the parameter is set to Yes, the short pick will cancel the shorted order line automatically and inventory adjustment will be generated for the item.

QUESTION 51
Which three configurations are required to sort the SKU A and B while receiving? (Choose three.)

An IB Shipment Type should be created to receive Purchase Order with sort SKUs.

Use Custom Field in Vendor UI to map the item that needs to be sorted.

BreakRule with Criteria needs to be set for the Sorting Rule.

Receive Station Location for Sorting should be created and mapped with the Sorting Rule.

Putaway Type should be configured for the SKU.

The Locations Size type should be defined for eachReceive Station Location.

QUESTION 52
Identify three valid statements related to IB Sorting. (Choose three.)

IB Sorting can be done by Manual and System driven method

IB Sorting is done after Putaway

IB Sorting will group SKUs with different Putaway typeand build in a single pallet

IB Sorting is done before Putaway

IB Sorting is done based on Putaway Priority.

QUESTION 53
You are using the WMS Cloud at the Stores as well as the DC. Your workflow at that Store requires that you quicklypick orders for the customer when they arrive.
Which configuration allows you to achieve this workflow requirement?

Create an Order Type with the flag “Allocate during Pick” enabled so that you can pick orders at the store without waving.

Set the Order Type to “Pick Without Wave”. This allows the RF options to automatically pick up those order and display to pickers.

Create a Flow Through process and configure each customer’s address as a “Designation Location”

Change the Order Type to “Rush” and wave it because the customer is waiting.

Create a wave template with Wave Template Type “Store”, then wave will allocate orders in a FiFO sequence.

QUESTION 54
Your customer wants to receive an IB shipment and capture pallet weight at the time of receiving.
Which parameter must be set in the Receiving RF screen to meet this requirement?

SetCapture-catch-weightas “Prompt for catchwt”.

SetModeas Blind-ASN Receiving.

Setrch-sku-not-on-shmntto “Promt for catch wt”.

SetSingle-Sku-managementas Assume Single SKU.

SetBlind-License Plate Number-receive-modeas by SKU scan.

QUESTION 55
Your company’s count process has two levels:
* First, at the end of each quarter, the operators will need to get a list of all the LPN numbers in every location via cycle count.
* Second, at the end of each month, the operators will do a spot check for any 100 LPNs and count their content information, and to save time, they will scan each item only once and enter the total quantity of the item marked on the inner package inside an LPN.
Your company has reserve locations only for storage and you’re doing the WMS Cloud configuration for the operators. Which two tasks should you complete? (Choose two.)

Create a Cycle Cnt RF screen for the operators to use, andleave thecontent-count RFparameter blank.

Create a Resv Nbr Cnt RF screen for the operators to use.

Enable the Recount Location Detail cc_trigger.

Create a Cycle Cnt RF screen for the operators to use, and set the content-count RF parameter to By Sku Qty.

Create a Cycle count for LPN deferred/immediate updates RF screen for the operators to use, and set the sku-scan-mode RF parameter to By Qty Scan.

QUESTION 56
You want to wave three orders. Two orders had the same route number in the order header, and the other order didn’t have a route number. You want to make sure the orders are assigned to the same load.
What should you do or check?

Change company parameter WAVE_ASSIGN_LOADto One load per wave

Change the Task selection criteria to be configured to assign by load.

Add another route number to the third order. As long as they are waved together, they will be assigned to the same load.

If they all have the same “Shipto Name” and “Ship to Address 1”, they will be assigned to the same load.

QUESTION 57
Which Inventory screen should you use to configure the Inventory Adjustment Code in Oracle WMS Cloud?

IB LPNs

Reason Codes

Items

Inventory Lock Codes

QUESTION 58
What is true about emailing a scheduled report?

You cannot customize the subject of the email

You can email reports in HTML format