[Q20-Q44] Get instant access to NS0-516 Practice Tests 2022 Free Updated Today!

4.5/5 - (2 votes)

Get instant access to NS0-516 Practice Tests 2022 Free Updated Today!

Welcome to download the newest PassLeader NS0-516 PDF dumps ( 66 Q&As)

NetApp NS0-516 Exam Topics:

Section	Objectives
Toolbox	-Describe the tools required to design and implement an E-Series solution.
Storage Configuration	-Describe how to setup alerting and notification for the E-Series system. -Describe how to create and administer Volume Groups or DDP and associated volumes. -Describe physical and logical storage requirements. -Describe the setup of CHAP for an iSCSI environment. -Describe when to use DDP or Volume Groups.
Documentation	-Describe the process of reviewing and preparing a site for implementation of E-Series. -Describe the information you give a customer after deploying a solution.
Management	-Describe the administrative tasks for managing E-Series systems with SANtricity System Manager. -Describe the management security features in SANtricity System Manager and SANtricity Unified Manager. -Describe when and how to configure and use SANtricity Unified Manager.
Hardware	-Describe the hardware components in an E-Series storage system. -Describe Fibre Channel, Ethernet, Infiniband and SAS cabling. -Describe the appropriate tasks for adding additional storage to an E-Series system. -Describe drive encryption features.
Troubleshooting	-Demonstrate the steps for troubleshooting an E-Series system. -Demonstrate how to analyze multipathing issues between a host and an E-Series system.
Protection	-Describe how Data Assurance with media scan protects your data. – Describe SANtricity data protection features.
SAN	-Describe the end-to-end network configuration for Fibre Channel and Ethernet.

NEW QUESTION 20
A company is using the Federal Information Processing Standard (FIPS) on all volume groups. However, one volume group failed a security audit.
In this scenario what would cause a volume group to fail the security audit?

An FDE drive was added as a spare in the volume group

Data Assurance was changed to “disabled” for the volume group

The Secure Erase operation was applied to the volume group disks

Connectivity to the key server was interrupted

NEW QUESTION 21
A d-stripe within a disk pool is always the equivalent of _______. (Choose the best answer.)

9+1 RAID 3

9+1 RAID 5

8+2 RAID 6

5+5 RAID 10

10+0 RAID 0

NEW QUESTION 22
What measurement refers to the number of read/write requests that can be handled in a 1-second time period? (Choose the best answer.)

Throughput

IOPS

Parity

I/O alignment

Read modify write

NEW QUESTION 23
Which two errors would fail a pre-upgrade health check? (choose two.)

Volumes are reported on a non-preferred path

I/O is being processed

An excess number of event log events are present

Hot spares are in use

NEW QUESTION 24
Which feature creates a full physical clone of a volume on an E-Series or EF-Series storage system?

Snapshot volume

Snapshot image

Volume Copy

FlexClone

NEW QUESTION 25
An administrator is asked to migrate two DE6600 shelves into a newly deployed E5760 environment that is configured with a stack of two DE460C shelves.
In this scenario, how does the administrator complete this task?

Cable the DE6600s at the beginning of the stack

Cable the DE6600s into a separate stack

Cable the DE6600s at the end of the stack

Cable the DE6600s between the DE460C shelves

Explanation
https://library.netapp.com/ecm/ecm_download_file/ECMLP2773537
When you cable a mix of SAS-2 and SAS-3 drive shelves to the same controller shelf, you should use a dual-stack configuration. Put all of the SAS-3 drive shelves in one stack and all of the SAS-2 drive shelves in the other stack.

NEW QUESTION 26
Hot spares provide which function? (Choose the best answer.)

both “efficiency for volumes” and “reserve capacity for disk pools”

efficiency for volumes

reserve capacity for disk pools

reserve capacity for volume groups

None of the above

NEW QUESTION 27
Exhibit:

Referring to the exhibit, which three steps would you take to solve the problem shown in the event log? (Choose three.)

Swap out the SFP in the controller port

Swap out the FC cable

Reinitialize the FC switch

Move the connection to another controller port

Swap out the HBA on the FC switch

NEW QUESTION 28
Which data protection strategy has the most overhead capacity as a percentage of the total capacity?

Dynamic Disk Pools (DDP)

RAID 6

RAID 5

RAID 10

NEW QUESTION 29
What is the SANtricity Client? (Choose the best answer.)

A host I/O performance modeling interface

A GUI or CLI run on a host server used for storage system management

Inter-process communication that supports computer program subordinates

An OS-dependent collection of utilities for servers attached to SANtricity-managed storage systems

A host server process that enables storage system management with the storage data path

NEW QUESTION 30
Controller firmware package files start with which character(s)? (Choose the best answer.)

SMIA

CFW

DLP

NEW QUESTION 31
What file on a Windows management host server contains information about the storage system management connections?

EMWdata_vxx.bin

AMWcfg_vxx.bin

mgmt.cfg

the event log

NEW QUESTION 32
You need to run a command from the SANtricity System Manager GUI to mark drives as native by using the CLI tool on an E-Series system that is running System Manager 11.60 or higher.
In this scenario, where would you locate this tool?

Help -> CLI Command Reference

Support -> Support Center -> Diagnostics

Modify Existing Storage

Settings -> System -> Addons

NEW QUESTION 33
If an FDE disk fails, which characteristic is required of the replacement disk?

Must be FDE capable

Must be loaded with DACstore

Must be of a greater capacity

Must be T10-P1 capable

NEW QUESTION 34
When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data?

It is rebuilt using the on-board backup database

It is rebuilt using preservation capacity within the DDP

It is evacuated to the preservation capacity within the DDP

It is evacuated to a hot spare drive that is assigned to the DDP

NEW QUESTION 35
The interval for an asynchronous mirror group should usually be equal to ______________. (Choose the best answer.)

the corresponding application’s RPO

half the corresponding application’s RPO

half the corresponding application’s RTO

the corresponding application’s RTO

the amount of time required to copy the size of the mirror repository to the remote site

NEW QUESTION 36
Which iSCSI setting would you change from its default value to increase the throughput of an iSCSI host port on a NetApp E-Series system?

maximum transmission unit (MTU)

flow control

Challenge-Handshake Authentication Protocol (CHAP)

Time to Live (TTL)

NEW QUESTION 37
When a drive fails in a Dynamic Disk Pool (DDP) with no free capacity, what happens to the data?

It is evacuated to the preservation capacity within the DD

It is evacuated to a hot spare drive that is assigned to the DD

It is rebuilt using preservation capacity within the DD

It is rebuilt using the on-board backup database

NEW QUESTION 38
Which three are techniques for troubleshooting the management connection? (Choose three.)

Check the Ethernet cables (out-of-band).

Restart the agent (in-band).

Ping the controller ports (out-of-band).

Delete the EMWdata_vxx.bin file (in- and out-of-band).

NEW QUESTION 39
How many 32 Gb ports are on one FC host interface card (HIC) on the NetApp E2800, EF280, E5700, and EF570 systems?

NEW QUESTION 40
To discover events that need to be reported to the storage administrator, which log does the Event Monitor poll?

Major Event Log

ASUP log

Recovery Guru log

Array Profile

NEW QUESTION 41
Which two actions must be performed to enable iSCSI multipathing on Windows for NetApp E-Series systems? (Choose two.)

Set up iSCSI IP addresses on the E-Series system and the Windows host

Install the Host Utilities on the Windows host

Create two VSANs on the iSCSI switches

Install a Host Channel Adapter (HCA) on the Windows host

NEW QUESTION 42
Which two steps are required to enable multifactor authentication on an E-Series system? (Choose two.)

Test SSO login

Configure In-Band Management

Map roles

Configure LDAP

NEW QUESTION 43
An administrator is asked to create a Dynamic Disk Pools (DDP) pool from eleven 12 TB disks with the requirement that there is adequate space available for a reconstruction if a drive in the pool fails.
In this scenario, what should the administrator do to satisfy this requirement?

Create the disk pool, and then edit the pool to reserve 12 TB of space

Create the disk pool, and then add another 12 TB drive to the pool

Create the disk pool, and then the system automatically reserves 12 TB of space

Create the disk pool, and then create a hot spare on another 12 TB disk

NEW QUESTION 44
A customer is running several EF570 systems and uses the ability of the EF-Series systems to run two host protocols at the same time. You are installing a new EF570 that uses the NVMe protocol for a high performance computing application. The controller on-board ports will not connect, but the HIC ports are working fine.
In this scenario, what is the problem?

The on-board host ports are disabled

There is a cable fault preventing the on-board ports from connecting

The on-board ports have the wrong SFPs for the desired network protocol

The switch ports are shut-down

Loading …