Check Real Veeam VMCE_v12 Exam Question for Free (2024) [Q121-Q142]

Q121. A company needs to maintain and verify backups at a secondary site to meet the following requirements: RTO of two hours, RPO of 12 hours, four weeks retention. Which of the following backup copy job configurations meets these requirements?

Periodic backup copy job, scheduled for a two-hour interval, with 56 restore points to retain

Periodic backup copy job, scheduled for a 12-hour interval, with 56 restore points to retain

Periodic backup copy job, scheduled for a two-hour interval, with 112 restore points to retain

Periodic backup copy job, scheduled for a 12-hour interval, with 112 restore points to retain

Q122. In the war against ransomware, a company decided to implement tape backup. The infrastructure contains Hyper-V VMs. What is the correct approach to getting all servers onto tape?

Create media pools, then create file to tape jobs.

Create media sets, then create backup to tape jobs.

Create media sets, then create file to tape jobs.

Create media pools, then create backup to tape jobs.

Q123. what should be Implemented when backing up HAS file shares to ensure there Is more than one copy of the data?

Cache repository

Backup repository

Archive repository

Secondary copy

Q124. A backup job is configured as follows.

How many full and incremental restore points will be in a repository on day 16 at 23:00?

3 full and 14 incremental

2 full and 12 incremental

3 full and 15 incremental

1 full and 13 incremental

Q125. An Infrastructure with 50 VMs has Issues with the underlying storage. 10 large VMs show the error “NVRAM write failure. Which restore method will bring back those VMs to the production state?

Use the “Restore guest files” option to restore the NVRAM and VM disk files.

Perform Instant VM Recovery with the option “NVRAM-only” enabled.

Use Restore VM Files and restore the NVRAM file.

Perform Instant VM Recovery with quick rollback with automatic Power On VM at the end.

Q126. Which Veeam Backup & Replication job type offers the shortest recovery time objective (RTO)?

Backup copy

Backup to tape

Replication

File to tape

Q127. A backup of a Linux VM running on a VMware cluster has been created. In which scenario can the Quick Rollback option be used during a Full VM Restore of the VM?

Migration of VM to VMware host in a different data center

Migration of VM to Hyper-V host in same data center

Issues caused by host power outage

Issues caused by VM software update

Q128. After performing a failover to a disaster recovery site, it is decided that the VMs need to be failed back to the original production site and that any changes made during the failover should be discarded. Which option should be used?

Undo failover

Undo failback

Failback

Commit failback

Q129. A failover plan helps you perform automatic failover for dependent VMs one by one, as a group. What can you define in a failover plan?

Define the order in which VMs must be processed and the interval time between two VMs to failover.

Set the RTO value per VM according to the organization policy.

Target the destination host that the failover would be performed to.

Define an alert for when the failover plan should be executed.

Q130. A Scale-out Backup Repository with one local extent has been configured as follows.

12 VMware VMs are being backed up daily by a forward incremental backup job, which has a 31-day retention, creating synthetic fulls on Saturdays. After running for more than 31 days, which of the following would be accurate?

The performance tier will contain all restore points. The capacity tier will contain zero restore points.

The performance tier will contain the most recent 14 to 20 days of restore points. The capacity tier will contain all restore points.

Both the performance tier and capacity tier will contain all restore points.

The performance tier will contain the most recent 14 to 20 days of restore points. The capacity tier will contain the older 17 to 23 days of restore points.

Q131. A Veeam proxy server is configured as follows. No modifications are allowed to the transport mode.

When performing a restore of a thin-provisioned VMware virtual disk on an NFS data store using this proxy server, what transport mode will be used by default?

Direct SAN access

Virtual appliance

Network

Direct NFS access

Q132. What does Veeam’s Secure Restore functionality ensure during restores?

256-bit AES encryption of in-flight data

Anti-virus scanning

Custom ports for in-flight data

Proper rights/permissions on files and folders

Q133. It is required that some replicated VMs start on a time delay during a failover. How can this be accomplished?

Modify the failover template file.

Create a failover plan.

Use a pre-freeze/post-thaw script

Adjust boot delay in application group.

Q134. A Scale-out Backup Repository with one local extent has been configured as follows.

A daily VMware backup job retention is 31 days, keeping weekly GFS full backups for 14 weeks.
It is Jan. 10. A file from a backup that occurred on Jan. 1 must be recovered. Where is the data?

The archive tier

The performance tier and the capacity tier

The performance tier

The capacity tier

Q135. If the deduplication setting are changed for an existing job, when will the new setting be applied?

At the next run of the job

If any kind of full backup is created

If a new active full backup Is created

Only when you rescan the repository that stores the backup files

Q136. Which backup method will always produce a full backup as the most recent restore point?

Forever forward incremental backup

Forward incremental backup

Reverse incremental backup

Forward incremental with transform

Q137. The configuration database is corrupted, and the backup administrator wants to recover the data. Which configuration restore mode should be used?

Restore

Instant Recovery

Failover

Migrate

Q138. A scale-out backup repository is configured with data locality policy. How is an extent selected during an active full backup? (Choose two.)

Always the same extent as the previous full backup

An extent determined based on load control settings and free space

A different extent from the previous chain to avoid single point of failure, if possible on free space

It tries the same location as the previous full if using a deduplication appliance

Q139. A critical server in a Hyper-V environment has crashed and will not reboot. What is the fastest way to bring this server back online so employees can continue to work?

Instant VM Disk Recovery

Entire VM restore

Instant VM Recovery

Staged restore

Q140. A customer currently has one backup job that runs every four hours to backup their VMs in a transaction consistent state. Which job configuration will keep all restore points safe in case the primary site and backups go down while still being able to do a point-in-time recovery of a SQL database from the backups on the second site?

Configure a second VM backup job and schedule it to copy every four hours, starting at midnight, to a repository on the second site

Configure a backup copy job in mirror mode, to a repository on the second site

Configure a backup copy job in pruning mode and schedule it to copy every four hours, starting at midnight, to a repository on the second site

Configure a backup copy job in pruning mode and have it copy data every day, starting at midnight, to a repository on the second site

Q141. An administrator has decided to set up a VM backup job covering their Microsoft SOL servers. What feature must be enabled to ensure quiescence of the SQL databases during the backup?

Enable Microsoft SQL server plug-in.

Enable application-aware processing.

Enable Microsoft Windows OS processing.

Enable Microsoft SQL server agent on the VMs

Q142. If you need to run a script to stop a service in order to get an application-consistent backup on a Windows server, where can the script be run?

In the guest processing setting of the job, enable application-aware processing and add a pre-freeze script to the VM

Configure the script to run on the Veeam Backup & Replication server using the Windows Task Scheduler

Copy the script to the VM and schedule the script to run prior to the start of the backup job using the Windows Task Scheduler in the VM

In the virtual machines setting of the job, add a script in the scripts tab under “Run the following script before the job:”