[Jun-2024] Latest E_S4HCON2023 Exam Dumps for Pass Guaranteed [Q11-Q35]

Rate this post

[Jun-2024] Latest E_S4HCON2023 Exam Dumps for Pass Guaranteed

Reliable SAP Certified Technology Specialist E_S4HCON2023 Dumps PDF Jun 22, 2024 Recently Updated Questions

QUESTION 11
What is the main purpose of performing benchmark runs for an SAP S/4HANA conversion?

To optimize the migration

To optimize the activation

To optimize the conversion

To optimize the main import

QUESTION 12
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above?
There are 3 correct answers to this question.

Dual Stack split

Support Package Stack update

Database migration

Release upgrade

Homogenous system copy

QUESTION 13
You are running an SAP ECC system with SAP_BASIS 740, non-Unicode on SAP MaxDB. Which of the following are possible paths to perform an SAP S/4HANA conversion? Note: There are 3 correct answers to this question.

Unicode conversion Upgrade to SAP ECC with SAP_BASIS 750 including database migrationSAP S/4HANA conversion without database migration

Unicode conversion SAP S/4HANA conversion including database migration

Unicode conversion SAP S/4HANA conversion without database migration Database migration

SAP S/4HANA conversion including database migration and Unicode conversion

Unicode conversion Database migration SAP S/4HANA conversion without database migration

QUESTION 14
You are performing an SAP S/4HANA conversion. You are in the BIND_PATCH phase of the Configuration roadmap step. For some software components, you find entries in the Calculated level column. What does the Calculated level indicate for those software components?

The SAP support packages that will be bound to the conversion

The SAP support packages contained in the upgrade media, calculated by the maintenance planner

The SAP support packages of the support package stack, calculated by the maintenance planner

The SAP support packages in the download directory that are newer than the selected support package stack

QUESTION 15
During a SUM run you want to check if the phase SHADOW_IMPORT_INC is still running properly. Where can you find information about this?
There are 2 correct answers to this question.
Response:

Check for running batch jobs in the shadow system via Job Overview (SM37)

Check for running R3trans processes on the host of the primary application server

Check for running R31oad processes on the host of the primary application server

Check for the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp

QUESTION 16
Which of the following SUM activities require a stack XML file calculated by the maintenance planner? Note: There are 3 correct answers to this question.

SAP S/4HANA conversion including DMO

Prerequisite check

DMO without system update

SAP S/4HANA conversion without DMO

Benchmark tool

QUESTION 17
What can you achieve by setting the SUM parameter “migration_only” to 1 in parameter file SAPup_add.par?
Please choose the correct answer.
Response:

An upgrade of the software components is performed, without changing the database type.

A change of the database type is performed, without changing the software components.

An SAP S/4HANA conversion is performed, without adapting the customer data.

A migration of the SAP system to a new hardware is performed, without performing an SAP S/4HANA conversion.

QUESTION 18
You are performing an upgrade with SUM. You are in the BIND_PATCH phase of the roadmap step
“Configuration”. For some software components you find entries in the “Calculated level” column.
What does the “Calculated level” indicate for those software components?
Please choose the correct answer.
Response:

The SAP Support Packages contained in the upgrade media

The SAP Support packages of the Support Package Stack, calculated by the Maintenance Planner

The SAP Support Packages that will be bound to the upgrade

The SAP Support Packages found in the download directory

QUESTION 19
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC
6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.

Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU
&UC) procedure.

Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.

QUESTION 20
Which additional configuration options are offered by SUM when selecting “Switch expert mode on” in main configuration option “Standard”?
There are 2 correct answers to this question.
Response:

Keep archiving on during the whole procedure.

Use the Near Zero Downtime Maintenance Technology (NZDM).

Reuse a profile for the shadow instance from a previous run.

Choose the instance number of the shadow instance.

QUESTION 21
You are using DMO of SUM. You defined 40 parallel R3load processes during uptime and 80 parallel R3load processes during downtime. You have chosen table count verification, but not table contents comparison.
Phase EU_CLONE_MIG_DT_RUN is running. In the Charts Control Center, you can see 40 process buckets being executed in parallel.
Why are 40 Process Buckets executed in parallel?

These are 40 pairs of Reload processes, so there are 80 R3load processes running.

SUM is still running in uptime; the 40 defined Reload processes are considered.

Without table contents comparison, only 40 R3load processes are being started.

There are 40 Reload processes used for copying and 40 Reload processes for table count verification.

QUESTION 22
What is the minimum SAP_BASIS release of an SAP ECC system that can be converted to an SAP S/4HANA Server?

750

700

731

740

QUESTION 23
What do you need to know about the SAP S/4HANA Conversion Guide? Note: There are 2 correct answers to this question.

It explains the database migration option (DMO) of SUM.

It contains a section about the simplification item (SI) checks.

It explains where to find information about the custom code analysis.

It is a database-specific document.

QUESTION 24
In which case can you use near-Zero Downtime Maintenance (nZDM)? Note: There are 2 correct answers to this question.

When performing an SAP S/4HANA conversion with DMO

When performing an SAP S/4HANA conversion without u DMO

When upgrading an SAP S/4HANA Server system

When upgrading an SAP ECC system with DMO

QUESTION 25
You want to perform custom code check via ABAP test cockpit in preparation of your SAP S/4HANA conversion? What kind of SAP System can you use to generate the custom code migration worklist?

A Standalone SAP system with ABAP 7.51 or above

An SAP S4HANA 1709 sandbox system

QUESTION 26
Which step can be optimized when you provide the MIGRATE_DT_DUR.XML file to SUM?

Shadow on target creation

Downtime conversion

Silent data migration (SDM)

Downtime migration

QUESTION 27
What is the different between the benchmaking and the repetition option of the Database Migration Option (DMO) of SUM?

The benchmaking option allows you to migration a specified set of tables

The benchmaking option allows you to repeat the uptime migration

The repetition option allows you to run the migration without a shadow system

The repetition option allows you to repeat the complete migration

QUESTION 28
Which maintenance events are possible with SUM for an SAP system based on AS ABAP 7.40 and above? There are 3 correct answers to this question.

Dual Stack split

Support Package Stack update

Database migration

Release upgrade

Homogenous system copy

QUESTION 29
What are the benefits of using the benchmarking option of the DMO for SUM? Note There are 2 correct answers to this question

You can verify that the content of the download directory matches the stack XML file.

You can obtain migration duration tiles from a previous benchmark run that can be used to optimize the next runs

You can record the modification adjustment during migration and use the transports in the next runs.

You can find the optimal number of parallel H3load processes by monitoring host performance

QUESTION 30
Which Guides contain information about SUM phases starting with “EU_CLONE_”?
There are 2 correct answers to this question.
Response:

The SAP S/HANA Conversion Guide

The Application Guide

The major SUM Guide

The DMO Guide

QUESTION 31
You are planning to use DMO of SUM to perform an “inplace-migration” to SAP HANA. What do you need to consider? Note: there are 2 correct answers to this question.

The source system is non-Unicode and the target database is a scale-out system.

The target database size increases temporarily because of the Shadow Repository.

SAP HANA Landscape Reorganization required a manual step to edit a file.

Network capacity between exporting and importing R3load processes must be.

Unicode conversion is part of DMO only in case of target version AS ABAP 7.40 or 7.31.

QUESTION 32
You are planning to upgrade your SAP ECC 6.07 system running on a single codepage (SCP) to SAP ECC 6.08. What is the recommended option to perform this upgrade?
Please choose the correct answer.
Response:

Perform the upgrade to SAP ECC 6.08 before the Unicode conversion.

Combine the upgrade and the Unicode conversion using the Twin Upgrade &Unicode Conversion (TU &UC) procedure.

Perform the Unicode conversion before the upgrade to SAP ECC 6.08.

Combine the upgrade and the Unicode conversion using the Combined Upgrade &Unicode Conversion (CU &UC) procedure.

QUESTION 33
During the SUM procedure, the phase XPRAS_AIMMRG fails. Where can you most likely see the reason for the error?
There are 2 correct answers to this question.
Response:

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory tmp

In the latest log files in the SUM directory, subdirectory ABAP, subdirectory log

In the job log for the corresponding job in SM37 (Job Overview)

In the corresponding R3trans log files of this phase

QUESTION 34
Which steps can SUM perform during an SAP S/4HANA conversion? Note; There are 2 correct answers to this question.

Unicode conversion

Custom code analysis

Database migration

Software update

QUESTION 35
You are performing an upgrade with SUM using DMO to an AS ABAP 7.50 based SAP system. You entered a specific number of R3Ioad processes during Roadmap step “Extraction”.
Where can you change this during the migration via the Utilities option of the SUM UI?
There are 2 correct answers to this question
Response:

In SUM Phaselist

In Process Control Center

In SUM Parameters

In DMO Migration Preparation