NO.137 A company has 10 access point licenses available on their backup Cisco WLC and their primary Cisco WLC is at full capacity, 5 access points are set to high failover priority and 7 access points are set to critical failover priority. During a failure, not all critical access points failed over to the backup Cisco WLC. Which configuration is the cause of this issue?

NO.138 Guest anchoring is configured for a newly created SSID for your company. It has been noticed that the mobility tunnels are not up, and that MPING fails from your foreign WLC to the anchor WLC. What is the reason that it is failing?

NO.139 During a meeting to gather the requirements for a new Wi-Fi network design, the customer requests that to connect. Which affect does this have to the wireless network?

NO.140 An engineer is designing a wireless network to support hyperlocation in an environment that already has APs installed. During the survey, the engineer notices that the APs are pointing in different directions. What is the recommended way to align the APs to easily determine AP Azimuth, X-Y, and ceiling height information, and minimize confusion and user-entered errors?

NO.141 An enterprise is using the wireless network as the main network connection for corporate users and guests. To wireless network availability. Two Standalone controllers are installed in the head office. APs are connected to the controllers using a round-robin approach to load balance the traffic. After a power cut, the wireless clients disconnect while roaming. An engineer tried eping from the controller but faits. Which protocol needs to be allowed between the networks that the controllers are installed?

NO.142 An engineer must ensure that the wireless network can accomplish fast secure roaming by way of caching keys on the access points. Which key caching mechanism is enabled by default on a Cisco AireOS WLC?

NO.143 Which statement about the 9800 Series Wireless Controller mobility tunnel on a Cisco Catalyst 9800 controller is true?

NO.144 Which Cisco VPN technology can use multipoint tunnel, resulting in a single GRE tunnel interface on the hub, to support multiple connections from multiple spoke devices?

NO.145 A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?

NO.146 An engineer is reducing the subnet size of the corporate WLAN by segmenting the VLAN into smaller subnets. Clients will be assigned a subnet by location. Which type of groups can the engineer use to map the smaller subnets to the corporate WLAN?

NO.147 A network engineer is preparing for an office site survey with a height of 2.5 meters. Which three components are recommended to complete the survey? (Choose three.)

NO.148 An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?

NO.149 An engineer has performed a predictive site survey for high-speed data and voice in an indoor office. What is the recommended data rate with -67 dBm signal level for optimal VoWLAN design?

NO.150 A customer asks an engineer to explain the concept of mobility domains and mobility groups. Which statement does the engineer respond with?

NO.151 Which two criteria must be considered when conducting an outdoor bridge site survey? (Choose two.)

NO.152 An engineer is designing a wireless deployment for a university auditorium. Which two features can be used to help deal with the issues introduced by high AP count? (Choose two.)

NO.153 As part of a wireless site survey in a hospital, an engineer needs to identify potential Layer 1 interferers. In which two areas is the engineer most likely to find sources of 2.4 GHz and 5 GHz RF noise? (Choose two.)

NO.154 A university has three campus locations and the main data center. Each campus location has a Cisco Catalyst 9800-40 WLC that manages 600 APs. The data center has a Catalyst 9800-40 WLC, which serves as an N+1 backup for each campus WLC. A consulting engineer must install four additional Catalyst 9800-40 WLCs to serve as the high availability SSO pair for each campus, but only two have been approved due to budget restrictions. The new WLCs must be implemented using these requirements:
– Data center WLC must always be available as N+1 backup to either
campus WLC.
– Campus1 WLC must operate with zero downtime.
– In the event of multiple campus outages, the AP priority order is to
support Campus3, Campus2, and then Campus1.
– No APs on campus can be left stranded without a WLC in the event of
an outage.
What design approach must the consulting engineer take?

NO.155 A wireless engineer is hired to design a network for a technology company. The company campus has four buildings and a warehouse with access points that provide full wireless coverage as well as a pair of WLCs located in the core of the network. Which type of wireless architecture is being used?

NO.156 What is the attenuation value of a human body on a wireless signal?

NO.157 An engineer must decide the cell overlap for a wireless voice deployment. Which Cisco measurement recommendation should be considered?

NO.158 An engineer is designing a wireless network to support nigh availability. The network will need to support the total number of APs and client SSO. Live services should continue to work without interruption during the failover.
Which two requirements need to be incorporated into the design to meet these needs? (Choose two)

NO.159 A wireless network consists of:
– two IOS XE controllers installed in a data center
– 9100 series APs
– corporate and a guest WLAN
The customer must high availability pair two Cisco WLCs for the client SSO. Which two design approaches must the engineer take to meet the requirement? (Choose two.)