[Q32-Q48] Exam Passing Guarantee Mar 26, 2026 FlashArray-Implementation-Specialist Exam with Accurate Quastions!

5/5 - (1 vote)

Exam Passing Guarantee Mar 26, 2026 FlashArray-Implementation-Specialist Exam with Accurate Quastions!

Test Engine to Practice Test for FlashArray-Implementation-Specialist Valid and Updated Dumps

NO.32 An Implementation Engineer completes an installation running 6.x and needs to log back into the array to run final health checks. After rebooting the controllers, which user account should the Implementation Engineer use to log in?

pureuser

puresetup

pureeng

NO.33 What slot does a PCIe SAS card need to be installed in a FlashArray//XR2/3?

NO.34 A customer wants to expand the capacity of their FlashArray//X10 from 5/5 to 11/11. Which is the correct action to take?

Evacuate and swap one pack at a time.

Perform a drive-by-drive swap of the modules.

Install a swing shelf with loan capacity to evacuate to.

NO.35 An Implementation Engineer needs to run the puresetup replace procedure on the FlashArray//X during a controller upgrade.
Which command should the Implementation Engineer run on the new controller to determine its model?

hwconfig –all

hwconfig –model

purearray list –controller

NO.36 Support requests a powercycle on a newly-installed FlashArray. What is the correct way to perform this action?

Push the power button on each controller.

Unplug the cable on each power supply.

Run purearray reboot.

NO.37 What is the maximum number of SAS shelves supported for FlashArray//XL?

NO.38 Which I/O card type is compatible across all FlashArray models?

10GBaseT

iSCSI

NO.39 When accessing the FlashArray GUI, which management IP address is recommended for use?

CT1 management IP

CT0 management IP

Virtual management IP

NO.40 What is the default FlashArray//XLR5 – FC configuration shipped for new installs?

4-port 32G FC card with 32G optics installed in PCIe Slot 1; 2-Port 32G FC card with 32G optics installed in PCIe slot 3; DirectCompress Accelerator installed in PCIe slot 8

4-port 32G FC card with 32G optics installed in PCIe slot 3; 2-Port 32G FC card with 32G optics installed in PCIe slot 5; DirectCompress Accelerator installed in PCIe slot 6

4-Port 32G FC card with 32G optics installed in PCIe slot 4; 2-Port 32G FC card with 32G optics installed in PCIe slot 3; DirectCompress Accelerator installed in PCIe slot 5

NO.41 When transforming an array from SAS to NVMe with the Evergreen XFORM upgrade, when should a swing shelf be installed?

When the chassis is populated with two data packs

When there is insufficient free space to evac capacity.

When the array is half populated with Flash Modules

NO.42 Which ports are used by default for replication on a FlashArray//XR4?

ETH2 and ETH3

ETH3 and ETH4

ETH0 and ETH1

NO.43 A client needs to upgrade Purity on their FlashArray, but is unable to wait for an available upgrade date from support. What action should the customer take?

Open a ticket with support, download the latest Purity version, copy to a USB flash drive, and run the pureinstall command on each controller.

Log into the Purity CLI, download the latest Purity version, and run the pureinstall command on each controller.

Go through the Self-Service upgrade portal on Pure1 Manage and upgrade to the latest Purity version.

NO.44 An Implementation Engineer performs a controller upgrade. What is the command to check I/O health?

purehost list –all

pureport list –initiator

purehost monitor –balance

NO.45 A customer wants to expand the capacity of their FlashArray//X10 from 5/5 to 11/11. Which is the correct action to take?

Evacuate and swap one pack at a time.

Perform a drive-by-drive swap of the modules.

Install a swing shelf with loan capacity to evacuate to.

NO.46 An Implementation Engineer is upgrading a FlashArray//X50R3 to an //X50R4. The array has 10 SAS and 10 DirectFlash modules in the chassis. What type of controller is required to complete the upgrade?

FLASHARRAY//XC50 R4, SE

FLASHARRAY//XC50 R4, NS

FLASHARRAY//XC50 R4

NO.47 The Customer’s Implementation Workbook specifies that the SMTP reply is “outlook.microsoft.com:587”. What correction should be made for array initialization to be successful?

Provide username and password.

Prefix the URL with “https://”.

Remove the port number.

NO.48 Which NVRAM bays are always populated on the FlashArray//XR2/3?

0-3

0-2

0-1