[May-2026] 1z0-1033-24 Exam Dumps – Free Demo & 365 Day Updates [Q34-Q54]

4.5/5 - (2 votes)

[May-2026] 1z0-1033-24 Exam Dumps – Free Demo & 365 Day Updates

Free Sales Ending Soon – Use Real 1z0-1033-24 PDF Questions

NEW QUESTION 34
A use case requires displaying 250 rows of data to a user and allowing the user to interact with the data in a mobile interface.
What is the Oracle-recommended method for displaying an interactive 250-row data set in a Configurator?

Split the data into two array sets and use logic to show the relevant set of data.

Use an HTML attribute to display the data and use JavaScript to create interactivity.

Use an array set to show this data.

You do not have a good option because 250 rows are too much to display on the screen of a Configurator.

NEW QUESTION 35
You want to perform a configuration migration from a development site to a QA site. What is the Oracle- recommended way to accomplished this?

Using a DB Link, log in to the development site through the Migration Center section, select the components that need to be migrated, and start the migration.

Open Migration Center in the development site, log in to the QA site through the Migration Center section, select the components that need to be migrated, and start the migration.

Open Migration Center in the QA site, log in to the development site through the Migration Center section, select the components that need to be migrated, and start the migration.

Download the components that need to be migrated from the development site and upload them to the QA site.

NEW QUESTION 36
What is the order of execution when a new transaction is created?

main doc integration, advanced main doc default BML, attribute defaults

process integration, attribute defaults, advanced main doc default BML

process integration, advanced main doc default BML, attribute defaults

process integration, attribute defaults, advanced main doc default BML, main doc integration

attribute defaults, advanced main doc default BML, process integration

advanced main doc default BML, attribute defaults, main doc integration

NEW QUESTION 37
You are asked to design a Document Designer template, which should generate an output document where users would be able to navigate to a specific section from the table of contents. This is a complex document with many sections and subsections that can go up to seven levels of parent/child relationships.
Which three steps do you need to perform to ensure that the table of contents show only two levels of the sections and subsections so that the user reviewing the document can navigate to a desired section’s page and scroll further to the deeper levels? (Choose three.)

Enable the Table of Contents option for selected heading styles.

Enable the Table of Contents option for all heading styles.

Assign a heading style set to the Table of Contents layout.

Create headings by using the Heading element for the section content in your template.

Assign page numbers to all heading elements.

NEW QUESTION 38
You want to add anew panel with three columnsto yourtransaction layoutinCommerce Layout Editor.
How can you accomplish this?

ClickAddand selectLayout Elements, drag a newPanel objectfrom theLayout Elementspop-up window onto thecommerce layout, and drop it where you want the new panel to appear. Enter the number of columns you wish to have in the new panel into the”# of Columns”field on theNew Panel pop-up windowand clickOK.

Drag a newPanel objectfrom theLayout Elements menuonto thetransaction layout, then drag three Panel Column objectsfrom theLayout Elements menuonto the new panel, placing each object next to each other horizontally to create the three columns.

Drag a newPanel objectfrom theLayout Elements menuonto thetransaction layout, then drag three Commerce attributesfrom theAttributes menuonto the new panel, placing each attribute next to each other horizontally to create the three columns.

Drag a newPanel objectfrom theLayout Elements menuonto thetransaction layout, then enter the number of columns you wish to have in the new panel into the”# of Columns”field on theNew Panel pop-up windowand clickOK.

NEW QUESTION 39
Identify two standard ways to modify the overall integration behavior of CPQ Cloud and Salesforce. (Choose two.)

Use the Site Setup object and CPQ Cloud Commerce Package settings in Salesforce to meet varying customer requirements.

Write a Salesforce API to change integration behavior in CPQ Cloud.

Use the integration XSLs within the Commerce process to modify integration behavior at the object and field levels.

Write a custom BML Util library function in CPQ Cloud.

NEW QUESTION 40
A customer sets up BOM Mapping for a Configuration model using a single simple Table-Based BOM Mapping Configuration rule, as well as the BOM Item Definition and BOM Item Mapping Tables. When reviewing their implementation, they notice the following:
* The BOM Root Items Administration List shows the root BOM item and its child BOM items correctly.
No errors are displayed.
* The BOM Item Mapping Administration List shows no root BOM item or child BOM items. No errors are displayed.
Which field have they incorrectly populated in their BOM Mapping Tables?

Root Variable Name in the BOM Item Definition Table

Configurable Attribute Variable Name in the BOM Item Mapping Table

BOM Item Variable Name in the BOM Item Mapping Table

Parent BOM Map Variable Name in the BOM Item Mapping Table

NEW QUESTION 41
Your customer wants to have theCommerce pricing functioninvoke aUtil library function applyDiscounts(), which appliesdiscountson thedistributor price, reseller price, and end-customer price, and then returns thediscounted values.
Which three approaches can you use to pass these values back to theCommerce pricing function?

Construct a return result stringin the following format and return this string: documentnumber- VariableName-value]

Add these values to a dictionary, along withappropriate keys, and return this dictionary.

Add all values to an arrayand return the array.

Return the values using multiple return statements.

NEW QUESTION 42
A multi-select attribute with five options is displayed as check boxes. Depending on the conditions, the Configurator should show a user three of these five options.
How do you accomplish this?

by writing a Constraint rule

by writing a Hiding rule

by writing a Recommendation rule

by writing a Pricing rule

NEW QUESTION 43
Your customer wants to create a user that has complete access to the site and has the ability to add and edit new users.
Which procedure should you follow to accomplish this?

Click the Add button on the User Administration List page; enter values for the required fields (Login, Password, Email, First Name, Last Name, and Phone Number); set the Type field to Admin; click the Add button to add the user to the system; click the new user’s name on the User Administration List page to edit the user; select the Add New Users check box; and click the Add button to save the changes.

Click the Add button on the User Administration List page; enter values for the required fields (Login, Email, and First Name); click the Add button to add the user to the system; click the new user’s name on the User Administration List page to edit the user; select the Create/Modify Users check box; and click the Update button to save the changes.

Click the Add button on the User Administration List page; enter values for the required fields (Login, Email, and First Name); set the Type field to FullAccess; select the Create/Modify Users check box, and click the Add button to add the user to the system.

Click the Add button on the User Administration List page, set the Type field to Admin, click the Add button to add the user to the system, click the new user’s name on the User Administration List page to edit the user, select the Create/Modify Users check box, and click the Update button to save the changes.

Click the Add button on the User Administration List page; enter values for the required fields (Login, Email, and First Name); set the Type field to FullAccess; click the Add button to add the user to the system; click the new user’s name on the User Administration List page to edit the user, select the Create/Modify Users check box; and click the Update button to save the changes.

NEW QUESTION 44
A Commerce Constraint rule has been used to show only the applicable currencies in the Currency attribute based on the value selected in the Country attribute.
After selecting the value in the Country attribute, what should be performed to run the specified Constraint rule?

Any action will trigger the Constraint rule.

The Save action must be performed.

No additional action is needed.

The Submit action must be performed.

NEW QUESTION 45
Given the following code:

What will be returned?

(key) = (/library/book/@lang)(value) = (en)(value) = (fr)

(key) = (/lang/book/library)(value) = (en)(value) = (fr)

(key) = (/library/book/@lang)(value) = (English)(value) = (French)

(key) = (/library/book/@lang)(value) = (Spring in Action)(value) = (J2EE Blueprint)

NEW QUESTION 46
A red “X” appears instead of a part (item) in a configuration. What causes this?

The Recommended Item rule is recommending a part that does not exist.

The Recommended Item rule is not firing.

The Recommended Item rule is recommending more than one-part number.

The Recommended Item rule is recommending an incorrect price for the part number.

NEW QUESTION 47
The commerce step “Pending” has four participant profiles in the following order: SalesRep, SalesManager, Owner, and Admin. The Admin profile allows access with the FullAccess user type. The Owner profile has at performer steps “start” step selected. The step has an auto-forwarding rule.
A FullAccess user with the SalesGroupA and SalesManagerA groups creates a new quote and saves it, which moves the quote to “Pending.” The auto-forwarding rule returned the following two lines:
SalesManagerA~Company~SalesManager
SalesGroupA~Company~SalesRep
Which profile will be used to display the quote in the “Pending” step to this user?

SalesManager profile

Owner profile

Admin profile

SalesRep profile

NEW QUESTION 48
The user would like to run the “SFDC Quote Upsert” on a commerce action. Where would the user define this within CPQ?

The user will define the action to run in the SOAP Generator XSL.

The user will select the “SFDC Quote Upsert” from the Integration list in the Integration tab on the commerce action.

The user will select the “SFDC Quote Upsert” from the Modify tab in the commerce action.

The user will define the relation in the Integration Center under the Integration Platfrom within the Admin Homepage.

NEW QUESTION 49
How should an administrator set up a conditional restriction for access to a Product Family?

by providing conditional access criteria in the Restricted Access section of the home page setup

by setting up a restricted profile and user group in Commerce and hiding the add, reconfigure, and delete product options

by hiding the model Punch-In on the home page by using JavaScript

by writing a Constraint rule at the Product Family level

NEW QUESTION 50
Which two items are necessary to migrate between environments? (Choose two.)

Environments must have similar urls (for example, testcustomer and devcustomer).

Environments must be on the same major release (for example, 2016R2).

Environments must be on the same minor release (for example, 2016R2 update 2).

Administrators must have FullAccess logins for both environments.

Entities to be migrated must be deployed within 24 hours of the migration.

NEW QUESTION 51
Which are three testing strategies for Oracle CPQ Cloud? (Choose three.)

Test cases should be directly linked to business requirements.

Avoid using a test case tracking tool because it is time consuming to track all of the testing team’s efforts.

Perform isolated tests as well as intra-system and cross-system integration tests.

Create specific test data for accounts, opportunities, and contracts in the CRM system and use that data to perform end-to-end tests for CPQ Cloud quotes.

NEW QUESTION 52
Consider the following requirements for integration with Salesforce:
* Transaction information needs to be pushed back to Salesforce and synchronized.
* You must be able to synchronize a transaction with up to 1,000 lines back to the Opportunity Product object in Salesforce.
On the basis of these requirements, which three XSL sets should you use to provide the integration? (Choose three.)

SFDC Opportunity – Import

SFDC Quote – Upset

SFDC Products – Upset All (200, 400, 600, 800, 1000)

SFDC Quote – Process Updates

SFDC Opportunity – Upload

NEW QUESTION 53
What is the correct order of execution of Configuration rules for an attribute that has both Recommendation and Constraint rules written on it?

Recommendation, Constraint, Hiding, Recommended Item

Constraint, Hiding, Recommendation, Recommended Item

Constraint, Recommendation, Constraint, Hiding, Recommended Item

Hiding, Constraint, Recommendation, Recommended Item

Recommendation, Recommended Item, Hiding, Constraint

NEW QUESTION 54
How do you modify a specific user’s access (grant access or remove access) to Product Families, Supported Product Families, and Data Table folders?

For each Product Family or Data table folder affected, click the Modify tab for that item and then select or deselect the check boxes related to the users you want to grant access to or remove access from for this Product Family or Data Table folder.

Click the user’s name on the User Administration List page to edit the user, click the Access Permission tab, select or deselect the check boxes related to the items you want to grant access to or remove access from for this user.

Click the Group name on the Group Administration List page that has this user as a member, click the Access Permissions tab, select or deselect the check boxes related to the items you want to grant access to or remove access from for this user.

Go to the Product Family definition or the Data Table folder properties for which you want to grant or remove access, click the Access Permissions tab, select or deselect the check boxes related to the users you want to grant access to or remove access from for this Product Family or Data Table folder.

Use the Navigation Menus item on the Administration home page to grant or remove access to specific Product Families or Data Table folders for the user.

Oracle 1z0-1033-24 Exam Syllabus Topics:

Topic	Details
Topic 1	Integrating CPQ Cloud: This section of the exam measures skills of an Oracle CX Cloud Solution Architect and covers integrating CPQ Cloud with other platforms and enterprise applications. It focuses on creating seamless connections with CRM and ERP systems using APIs, middleware, and Oracle Integration Cloud services.
Topic 2	Applying Style and Templates: This section of the exam measures the skills of an Oracle CPQ Implementation Consultant and focuses on applying style sheets and templates to documents. It emphasizes how to structure, format, and enhance customer-facing documents like quotes, contracts, and proposals.
Topic 3	Configuring CPQ Cloud with Developer Tools: This section of the exam measures the skills of an Oracle CPQ Implementation Consultant and covers configuring CPQ Cloud using Developer tools. It includes tasks like applying BMQL queries, creating BML scripts, and managing core development aspects within CPQ for effective system customization.
Topic 4	Configuring CPQ Cloud with Commerce and Documents Designer Tools: This section of the exam measures the skills of a CPQ Cloud Application Specialist and covers setting up CPQ Cloud using the Commerce and Documents Designer tools. It involves designing the sales flow, configuring transaction processes, and customizing document generation to support quoting and proposal creation.

1z0-1033-24 Dumps – Pass Your Certification Exam: https://www.validbraindumps.com/1z0-1033-24-exam-prep.html

Free valid test braindumps

Leave a Reply Cancel reply