Pass Your H12-893_V1.0 Exam Easily – Real H12-893_V1.0 Practice Dump Updated Aug 19, 2026 [Q16-Q32]

Rate this post

Pass Your H12-893_V1.0 Exam Easily – Real H12-893_V1.0 Practice Dump Updated Aug 19, 2026

2026 Realistic Verified Free Huawei H12-893_V1.0 Exam Questions

Huawei H12-893_V1.0 Exam Overview:

Certification Vendor:	Huawei
Exam Name:	HCIP-Data Center Network V1.0 (H12-893) Exam
Exam Number:	H12-893_V1.0
Available Languages:	English, Simplified Chinese
Exam Format:	Single choice, Multiple choice
Exam Duration:	90 minutes
Certificate Validity Period:	3 years
Real Exam Qty:	60-70
Exam Price:	~200 USD (varies by region)
Related Certifications:	HCIA-Data Center Network HCIE-Data Center Network
Passing Score:	600/1000
Recommended Training:	HCIP Data Center Network Training Resources Huawei Talent Online Training
Exam Registration:	Huawei Certification Portal Pearson VUE Huawei Exams
Sample Questions:	Huawei H12-893_V1.0 Sample Questions
Exam Way:	Online proctored exam or authorized test center (Pearson VUE)
Pre Condition:	HCIA-Data Center Network or equivalent networking knowledge is recommended
Official Syllabus URL:	https://e.huawei.com/en/talent/certification

QUESTION 16
In EVPN Type 3 routes, the MPLS Label field carries a Layer 3 VNI.

TRUE

FALSE

QUESTION 17
In an M-LAG, two CE series switches send M-LAG synchronization packets through the peer-link to synchronize information with each other in real time. Which of the following entries need to be included in the M-LAG synchronization packets to ensure that traffic forwarding is not affected if either device fails? (Select All that Apply)

MAC address entries

Routing entries

IGMP entries

ARP entries

QUESTION 18
A tenant experiences intermittent communication after duplicate MAC addresses appear on different leaf switches. Which EVPN capability is designed to detect such situations?

MAC mobility handling

DHCP Relay

VRRP tracking

Port security aging

QUESTION 19
Which of the following technologies are Layer 4 load balancing technologies? (Select All that Apply)

Nginx

PPP

LVS

HAProxy

QUESTION 20
In which of the following phases can CloudFabric implement full-lifecycle automatic network management and control? (Select All that Apply)

Planning and construction

Service provisioning

O&M and monitoring

Change optimization

QUESTION 21
Which of the following issues can be identified by the health function of iMaster NCE-FabricInsight? (Select All that Apply)

Switch ARP entry threshold exceeded

OSPF router ID conflict

Switch CPU usage threshold exceeded

Routing loop on the network

QUESTION 22
A tenant requires independent Layer 3 routing tables while sharing the same physical VXLAN fabric with other tenants. Which technology provides logical separation of routing information?

VLAN

VRF

MSTP

LACP

QUESTION 23
iMaster NCE-Fabric is Huawei’s DC controller. Tenants can use it to create VPCs and deploy logical networks as required. After logical NEs are deployed, the corresponding network configurations are delivered to underlying network devices. Which of the following statements is false about the delivered network configurations?

Logical switches are mainly used for Layer 3 communication between hosts on a VXLAN network. These switches correspond to Layer 3 gateway configurations such as VBDIF interface and VPN instance configurations on physical devices.

An end port represents an online host. It corresponds to the traffic encapsulation type (whether a VLAN tag is carried) configured on a Layer 2 sub-interface of a physical device.

A logical port is equivalent to an independent physical port that is used by a host to connect to a VXLAN network. It corresponds to the Layer 2 sub-interface configuration on a physical device.

Logical switches are mainly used for Layer 2 communication between hosts on a VXLAN network. These switches correspond to BD and Layer 2 VNI configurations on physical devices.

QUESTION 24
Which of the following is not an advantage of link aggregation on CE series switches?

Improved forwarding performance of switches

Load balancing supported

Increased bandwidth

Improved reliability

QUESTION 25
Which of the following O&M functions are supported in Huawei CloudFabric Solution? (Select All that Apply)

Multi-path detection

Network connectivity detection, such as IP ping and MAC ping

Single-path detection

Visualization of entries (MAC/IP) on logical routers and switches

QUESTION 26
Which of the following operations need to be performed before deployment in Easy mode?
(Select All that Apply)

Disable data synchronization upon going online for the first time.

Load the license.

Pre-configure the access ports.

Configure an SSH fingerprint verification policy.

QUESTION 27
Which of the following statements are true about the tenant service model? (Select All that Apply)

A tenant can apply for independent compute, storage, and network resources.

One logical router is mapped to one VRF.

An EPG can have only one subnet.

A subnet supports the access of only one VM.

QUESTION 28
Which of the following statements is false about the overlay technology and VXLAN protocol?

A VXLAN tunnel endpoint that performs encapsulation is called a VNI.

VXLAN uses ECMP of the underlay network to improve network forwarding performance.

A VXLAN network is built based on UDP.

VXLAN expands the number of subnets to 16 million and supports multi-tenancy.

QUESTION 29
Which of the following can be deployed to enhance DC reliability? (Select All that Apply)

Power supply redundancy

M-LAG

Monitor Link

Controller cluster

QUESTION 30
Which of the following statements is false about M-LAG deployment?

Multi-level M-LAG is mainly used to construct a large Layer 2 network in a DCN or directly connect DCNs at Layer 2.

In multi-level M-LAG networking, you can manually configure the root bridge to prevent STP loops.

Multi-level M-LAG must be configured based on V-STP.

M-LAG networking can be classified into single-level M-LAG networking and multi-level M-LAG networking.

QUESTION 31
In the CloudFabric Solution, SecoManager and iMaster NCE-Fabric are deployed independently. After SecoManager is installed, it needs to be manually interconnected with iMaster NCE-Fabric.

TRUE

FALSE

QUESTION 32
Which of the following protocols is used to back up session tables between the active and standby firewalls in the hot standby scenario?

M-LAG

VRRP

BFD

HRP

Huawei H12-893_V1.0 Exam Syllabus Topics:

Topic	Details
Topic 1	Huawei CloudFabric Solution: Targeting IT Solution Architects, this section introduces Huawei’s CloudFabric solution, addressing evolving trends and challenges in data center networks. It highlights the solution’s components, key features, and advantages in modern data centers.
Topic 2	Data Center Network Planning and Deployment: This section assesses Data Center Network Engineers’ skills in planning, designing, and deploying data center networks using the CloudFabric solution. It covers network architecture design, data planning, underlay and overlay network design, security considerations, management strategies, and provides a deployment guide for the CloudFabric solution in computing scenarios, including pre-configuration, service provisioning, and simplified deployment processes.
Topic 3	Data Center Network Technology and Application: This section evaluates the skills of IT Solution Architects and Data Center Network Engineers in understanding the fundamental concepts, evolution, and significance of data centers in modern enterprises. It delves into the overall architecture, including computing, storage, and networking components, and highlights typical application scenarios in sectors like finance, government, and large enterprises. Additionally, it introduces core concepts of data center networking (DCN), focusing on the Spine-Leaf architecture, and provides an overview of essential data center technologies such as VXLAN-based network layers, Underlay and Overlay networks, integrated cabling designs (ToR, EoR, MoR), equipment room modules, and the role of iMaster NCE in managing network devices.
Topic 4	Data Center Network O&M: Aimed at Data Center Network Engineers, this section evaluates their understanding of operation and maintenance (O&M) challenges in data center networks. It introduces Huawei’s intelligent O&M solutions, including iMaster NCE-Fabric and iMaster NCE-FabricInsight, and discusses typical O&M scenarios, management, monitoring, troubleshooting practices, and automated O&M strategies through network service programmability.
Topic 5	Technical Principles and Applications of Virtualization: This section assesses the skills of IT Solution Architects and Data Center Network Engineers in understanding server and network virtualization concepts, benefits, and implementation strategies within data centers. It also introduces Huawei’s FusionCompute platform, its features, functionalities, and applications in virtualization scenarios.
Topic 6	Technical Principles and Applications of VXLAN: Aimed at Data Center Network Engineers, this section evaluates their understanding of the necessity, development, and foundational concepts of VXLAN technology in addressing traditional network limitations. It also delves into the principles of Ethernet VPN (EVPN) as a control plane for VXLAN and presents practical VXLAN deployment examples in common data center scenarios.