NO.51 Linings are used on the interior of pipelines to

NO.52 Surface preparation methods for Non-ferrous metals are:

NO.53 You are a NACE Level 2 Coating Inspector who has just arrived on a job in progress where there is no Inspection and Test Plan (ITP). The first morning you arrive the job is behind schedule and you are asked to take DIY Film Thickness readings.
Your FIRST preferred course of action is to:

NO.54 You are the NACE Level 2 inspector reviewing the documentation from a NACE Level 1 you notice significant documentation errors.
Your FIRST preferred course of action is to:

NO.55 NACE/SSPC Water Jetting standards are directly equivalent to ISO Abrasive Blast Standards:

NO.56 You are NACE Level 2 Inspector working on a tank lining job where a mobile centrifugal blast unit is being used to blast the tank floor to a NACE No.1/SSPC SP 5. The Contractor has completed his final blast and has called for a hold point inspection. This is the 1 st time you have seen field based centrifugal blast cleaning. You observe what appears to be staining on the substrate however the Contractor assures you this is normal when using centrifugal blast units and what you are seeing is what is defined in the standard as an acceptable variation in appearance.
Your FIRST preferred course of action is to:

NO.57 On pipelines, which coating is identifiable by its distinct colors, usually light blue, green, or grey?

NO.58 Inspection and Test plans are developed by referencing:

NO.59 The Concrete Repair Institute’s comparators can be used to assess:

NO.60 In which type of concrete are laitance commonly encountered?

NO.61 An Inspection and Test Plan is required when:

NO.62 Which concrete smoothing technique involves scrubbing a mixture of cement mortar over the concrete surface using ai cement sack, gunny sack, or sponge rubber float?

NO.63 Examples of non-ferrous metals include
Select All that Apply:

NO.64 A reinforced coating is

NO.65 NACE Standards include:

NO.66 You are working as an inspector in a galvanizing plant for the first time.
What are some of the hazards you need to be aware of:

NO.67 Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?