[Feb 14, 2024] Step by Step Guide to Prepare for 350-501 Exam BrainDumps [Q11-Q33]

Rate this post

Feb 14, 2024 Step by Step Guide to Prepare for 350-501 Exam BrainDumps

CCNP Service Provider 350-501 Real Exam Questions and Answers FREE Updated on 2024

Exam Details

Cisco 350-501 is a core exam and the applicants will have 120 minutes to cover all the questions of its content. There will be about 90-110 items that can be presented in the following formats: multiple choice, drag and drop, testlets, or fill-in-the-blank. The students are required to gain about 750-850 points for passing this test. Please note that this certification exam is available in English only.

Moreover, the test takers have to be ready to pay the fee of $400. This payment allows them to register and schedule the exam through the Pearson VUE platform that provides them with the opportunity to choose the appropriate delivery option. Thus, if you want to take Cisco 350-501 from the comfort of your office or home, you can opt for online testing. On the other hand, you can choose the in-person variant and have the exam at one of the Cisco testing centers.

NEW QUESTION 11
You are creating new Cisco MPLS TE tunnels. Which type of RSVP message does the headend router send to reserve bandwidth on the path to the tunnel’s router?

error

reservation

path

tear

NEW QUESTION 12
Whtch two routing protocols support Cisco MPLS TE tunnels? (Choose two.)

IS-IS

RIP

BGP

OSPF

EIGRP

NEW QUESTION 13
Refer to the exhibit:

R1 and R2 are directly connected with Fast Ethernet interfaces and have the above configuration applied OSPF adjacency is not formed. When the debug ip ospf hello command is issued on R1. these log messages are seen.

Which command can be configured on routers R1 and R2 on fO/O interfaces to form OSPF adjacency?

ip ospf network non-broadcast

ip ospf network point-to- multipoint non-broadcast

ip ospf network point-to-point

ip ospf network broadcast

NEW QUESTION 14
Which Cisco software OS uses monolithic architecture?

NX-OS

IOS XE

IOS XR

IOS

Cisco Internetwork Operating System (IOS) is the software used on most Cisco Systems routers and current Cisco network switches. IOS is a package of routing, switching, internetworking and telecommunications functions integrated into a multitasking operating system. IOS uses a monolithic architecture, meaning that all processes run in a single address space, making it a single-image system.

NEW QUESTION 15

Refer to the exhibit. Assume all other configurations are correct and the network is otherwise operating normally.
Which conclusion can you draw about the neighbor relationship between routers R1 and R2?

The neighbor relationship is up.

The neighbor relationship will be up only if the two devices have activated the correct neighbor relationships under the IPv4 address family.

The neighbor is down because the local-as value for R2 is missing in the R1 neighbor statement.

The neighbor relationship is down because R1 believes R2 is in AS 65012.

Section: Networking

NEW QUESTION 16
Refer to the exhibit:

What is the URL used for with REST API?

It is used to contact a URL filter to determine the efficacy of a web address

It is used to send a TACACS+ authentication request to a server

It is used to send a message to the APIC to perform an operation on a managed object or class operator

It is used to initiate an FTP session to save a running configuration of a device.

NEW QUESTION 17
The network operation center is receiving an excessive number of BFD alerts.
This is due to recently configured high-speed links that result in BGP session teardown.
Engineers tried to modify the BFD timers, but no improvement was noticed.
Which action maximizes network stability?

enable the BFD Dampening feature

fully remove the BFD configuration

modify the IGP hello timers

enable the BGP Dampening feature

NEW QUESTION 18
Refer to the exhibit:

When implementing an LDP protocol, an engineer experienced an issue between two directly connected routers and noticed that no LDP neighbor exists for 1.1.1.1.
Which factor should be the reason for this situation?

LDP needs to be enabled on the R2 physical interface

R2 does not see any hellos from R1

LDP needs to be enabled on the R2 loopback interface

R2 sees the wrong type of hellos from R1

NEW QUESTION 19
Refer to the exhibit:

What is significant about the number 2 in the configuration?

It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent

It dictates the number of sessions that can be open with the SNMP manager

It indicates two SNMP managers can read and write with the agent using community string cisco test

It represents the version of SNMP running

NEW QUESTION 20
Refer to the exhibit:

Which statement about the status of the neighbor relationship between R1 and R2 is true?

The neighbor relationship is down because the two routers are configured with different area types

The neighbor relationship is down because the two routers are in the same subnet.

The neighbor relationship is up because R2 is level 1 and level 2 router.

The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area

NEW QUESTION 21
Refer to the exhibit:

What does this value mean when it is received in XML?

It shows the ending of the script

It indicates a break in a sequence

It indicates a value assigned by a network administrator to tag a route

It means a data fie4d is blank

NEW QUESTION 22
When configuring traffic engineering tunnels in Cisco MPLS core network, you see the traffic is not taking the expected path in the core.
Which command do you use to quickly check path of a TE tunnel?

traceroute mpls ipv4 <tunnel destination>

ping <tunnel destination IP>

show mpls traffic-engineering tunnels

traceroute <tunnel destination IP>

NEW QUESTION 23
An engineering team must implement Unified MPLS to scale an MPLS network. Devices in the core layer use different IGPs, so the team decided to split the network into different areas. The team plans to keep the MPLS services as they are and introduce greater scalability. Which additional action must the engineers take to implement the Unified MPLS?

Redistribute the IGP prefixes from one IGP into the other routers to ensure end-to-end LSPs.

Configure the ABR routers as route reflectors that redistribute IGP into BGP.

Redistribute the IGP prefixes into another IGP to ensure end-to-end LSPs.

Move the IGP prefixes into IS-IS as the loopback prefixes of the PE routers to distribute the prefixes to other routers to create end-to-end LSPs.

NEW QUESTION 24
Refer to the exhibit.

An engineer has started to configure a router for secure remote access as shown. All users who require network access need to be authenticated by the SSH Protocol.Which two actions must the engineer implement to complete the SSH configuration? (Choose two.)

Configure an IP domain name.

Configure service password encryption.

Configure crypto keys

Configure ACL 100 to permit access to port 22.

Configure a password under the vty lines.

NEW QUESTION 25
Drag and drop the descriptions from the left onto the corresponding OS types on the right.

Explanation
IOS XE:
It uses linux-based kernel
It has a separate control plane
IOS:
It is monolithic
It shares memory space

NEW QUESTION 26
Refer to the exhibit. A network engineer is implementing a BGP routing policy.
Which effect of this configuration is true?

All traffic that matches acl10 is allowed without any change to its local-preference

All traffic that matches acl10 is dropped without any change to its local-preference

If traffic matches acl10, it is allowed and its local-preference is set to 300

All traffic is assigned a local-preference of 30O regardless of its destination

NEW QUESTION 27
Refer to the exhibit.

What type of configuration is it?

It is configuration that requires an explicit Cisco MPLS TE path to be configured for the tunnel to run.

It is configuration that requires OSPF to also be running to have optimized Cisco MPLS TE tunnels.

It is configuration for the head-end router of a Cisco MPLS TE tunnel with segment routing.

It is configuration that requires a dynamic Cisco MPLS TE path to be configured for the tunnel to run.

NEW QUESTION 28
Refer to the exhibit.

Refer to the exhibit. A network engineer is implementing multicast Source-A to send a multicast stream for Receiver-A, and multicast Source-B to send a multicast stream for Receiver-B. Router RC forwards the IGMP host a report and leaves messages to IP address 192.168.10.1. How must the multicast features be implemented to prevent RB from receiving multicast flooding from Source-A?

Change the helper-address value to 192.168.10.2 on RC.

Enable ip pim neighbor-filter on RC interface Ge0/0.

Configure PIM-SSM on RB and RC interface Ge 0/0.

Enable ip pim passive on RB interface Ge0/0.

NEW QUESTION 29
A network engineer must enable the helper router to terminate the OSPF graceful restart process if it detects any changes in the LS A.
Which command enables this feature?

nsf ietf helper disable

nsf cisco enforce global

nsf ietf helper strict-lsa-checking

nsf Cisco helper disable

NEW QUESTION 30
Drag and Drop Question
Drag and drop the technologies from the left onto the correct definitions on the right.

NEW QUESTION 31
Refer to the exhibit.

If RC is a stub router, which entry must be injected so that it will send traffic outside the OSPF domain?

virtual link between RB and RC

sham link

more specific route

default route

NEW QUESTION 32
Drag and drop the LDP features from the left onto their usages on the right.

NEW QUESTION 33
What is a feature of mVPN?

It requires-uncast to be disabled on the multicast domain

It establishes multiple static MDTs for each multicast domain.

It provides the ability to support multicast over a Layer 3 VPN.

It requires the no ip mroute-cache command to be configured on the loopback interface of each BGP peer

Loading …

To prepare for the Cisco 350-501 exam, candidates can attend training courses, study relevant books and resources, and practice with lab equipment. Cisco also provides online resources and practice exams to help candidates prepare for the certification. Passing the exam requires a thorough understanding of the topics covered, as well as practical experience in working with service provider networks.

Ultimate Guide to Prepare 350-501 Certification Exam for CCNP Service Provider: https://www.validbraindumps.com/350-501-exam-prep.html